0
0

EGW Trijicon RMR Sight Mount for EAA Tanfoglio Witness

UPC: 841370116768

$44.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Running a red dot on a Tanfoglio Witness used to mean shipping your slide off for milling. This EGW mount skips all of that. It drops into the factory rear sight dovetail, so you pull the adjustable rear sight, seat the mount, and bolt your optic right on top. No permanent cuts, no gunsmith, and you can pull it off and reinstall the original rear sight whenever you want.

What the EAA Tanfoglio Witness RMR Mount Is Built From

EGW machines this one from 7075 aluminum and finishes it in a matte black hardcoat anodizing, the kind of coating that holds up to real holster and range wear. It runs about 1.78 inches long and 1.1 inches wide and weighs next to nothing, so it won't throw off your slide balance or add any meaningful mass up top. It's made in the USA, which is what you'd expect from EGW's handgun mount lineup.

Optics That Fit the Witness Sight Mount

The footprint is cut for the Trijicon RMR, so anything sharing that pattern bolts right up. That includes the Trijicon SRO and the Holosun 407C, 507C, and 508C families, plus several Swampfox models built on the same footprint. If you've already got an RMR or an RMR-pattern dot sitting in a drawer, this is a clean way to get it onto your Witness.

Fitment and Install on the Tanfoglio Witness

This is the part worth double checking before you order. The mount fits EAA and Tanfoglio Witness pistols that have an adjustable rear sight with both windage and elevation, like the Stock II, Stock III, Limited, and P Match variants, along with the post-2006 Baby Desert Eagle and the Witness Elite Match. It does not fit Witness models with a fixed rear sight or Rock Island 1911s. Installation is straightforward: drop it in the dovetail, snug the set screw, then torque the two mounting screws to 15 in/lbs with blue Loctite using a 5/64 inch Allen wrench. Tucking a small piece of paper between the optic and the mount keeps Loctite off your sight and makes future removal easier.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49506
  • UPC: 841370116768
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat Anodizing
  • Overall Length: 1.780 in
  • Overall Width: 1.1 in
  • Optic Footprint: Trijicon RMR / SRO, Holosun 407C / 507C / 508C
  • Mounting Hardware: (2) 6-32 flat head screws, (1) 6-32 x 3/16 set screw
  • Torque Spec: 15 in/lbs with blue Loctite
  • Tool Required: 5/64 in Allen wrench
  • Number of Bases: 1-Piece
  • Color: Black
  • Country of Origin: Made in USA

What’s Included

  • EGW sight mount
  • (2) 6-32 flat head mounting screws
  • (1) 6-32 x 3/16 set screw

Frequently Asked Questions

Which pistols does this EAA Tanfoglio Witness RMR mount fit?

It fits EAA and Tanfoglio Witness pistols equipped with an adjustable rear sight that has both windage and elevation, covering models like the Stock II, Stock III, Limited, and P Match. It also works with the post-2006 Baby Desert Eagle and the Witness Elite Match. It does not fit Witness models with a fixed rear sight or Rock Island 1911s.

What optics work with this mount?

The mount uses a Trijicon RMR footprint, so the Trijicon RMR and SRO bolt right up, along with the Holosun 407C, 507C, and 508C families. Several Swampfox dots built on the same pattern will fit as well. If your optic shares the RMR footprint, it should seat without issue.

Do I need to mill my slide to install this?

No. This mount replaces the factory adjustable rear sight in the existing dovetail, so there's no machining or permanent modification to the slide. You can remove it and reinstall your original rear sight at any time.

How does the mount install and stay put under recoil?

You remove the rear sight, slide the mount into the dovetail, and snug the set screw that indexes against the dovetail to lock it in place. Then you torque the two mounting screws to 15 in/lbs with blue Loctite using a 5/64 inch Allen wrench. That set screw and Loctite combo is what keeps it holding zero through recoil.

Additional information

UPC

841370116768

Manufacturer

Manufacturer Part Number

49506

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Trijicon RMR Sight Mount for EAA Tanfoglio Witness”