Description
If you've ever tried to scribe a clean line on bare steel and squinted at the glare while your mark disappeared into the metal, this is the fix that shop guys have leaned on for generations. Dykem Steel Blue coats the surface in a thin, deep blue film that kills reflections and makes every scribed line pop with real clarity. It dries in minutes, so you're not standing around waiting to get to work.
This is the 4 oz bottle with the brush built into the cap, which is honestly the way most people prefer to run it. You dip, you brush a light coat across your workpiece, and you're marking lines in the time it takes to grab your scriber. The film goes on transparent and even, adds practically no thickness to the part, and stays flexible so it won't crack or chip while you handle the work.
Where Steel Blue Earns Its Keep
Gunsmiths and knifemakers reach for this stuff constantly. Dye the edge of a blade blank and scribe your grind line, coat a receiver or barrel before laying out drill and tap points, or trace patterns onto bar stock. Beyond marking, a lot of folks use it to reveal defects and pinholes on a surface or to check gear tooth contact patterns since the film shows exactly where metal meets metal.
Getting Clean Lines with the Layout Fluid
Brush on a thin, even coat and let it flash dry before you scribe. Scribed lines are far easier to read than a bare scratch in metal, and cleanup is simple with solvent or Dykem's own remover, so you're not polishing marks out of a finished part. A little goes a long way here. One bottle tends to stick around the bench for a very long time.
Made in the USA, Steel Blue has been the machinist and gunsmith standard for decades for a reason. It's dependable, it's affordable, and it does exactly one job extremely well.
Key Specifications
- Manufacturer: Dykem (ITW Pro Brands)
- Model Number / MPN: 80300
- UPC: 753769803008
- Color: Steel Blue
- Volume: 4 oz
- Form: Liquid
- Applicator: Brush-in-cap bottle
- Dry Time: Dries in minutes
- Cleanup: Removable with solvent or Dykem Remover & Cleaner
- Country of Origin: USA
What’s Included
- One 4 oz bottle of Dykem Steel Blue Layout Fluid with brush-in-cap applicator
Frequently Asked Questions
How do you use Dykem Steel Blue Layout Fluid?
Brush a thin, even coat onto clean metal using the brush built into the cap, then let it flash dry for a couple minutes. Once it's dry, scribe your lines and they'll stand out sharp against the deep blue film. Wipe your surface clean first for the best adhesion and the crispest lines.
Is this layout fluid good for gunsmithing work?
Yes, it's a bench staple for gunsmiths and knifemakers alike. It works great for laying out drill and tap points, marking grind lines on blade blanks, and tracing patterns onto steel. The glare-free coating makes your scribe lines easy to read even under shop lighting.
How do you remove Dykem Steel Blue when you're done?
It cleans off easily with a solvent or with Dykem's own Remover & Cleaner. Because it wipes away rather than needing to be polished out, you won't leave permanent marks on a finished part. That makes it ideal for temporary layout work on pieces you plan to keep clean.
Will a 4 oz bottle last a while?
It goes a very long way since you only need a thin coat for each job. For most hobbyists and part-time gunsmiths, a single bottle can last for years of layout work. The brush-in-cap design also keeps waste down since you apply exactly what you need.




Reviews
There are no reviews yet.