0
0

Faxon Duty 9mm 8.5″ AR9 Barrel – 1:10 Twist Nitride

UPC: 816341020788

$115.00

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Faxon built the Duty Series with one goal in mind: barrels that hold up to hard use without adding unnecessary weight or cost to your build. This 8.5" 9mm barrel is machined in-house from 4150 CMV steel, then treated with a salt bath nitride finish inside and out, which means better corrosion resistance and a slicker bore that's easier to keep clean after a long day of shooting. It's a solid choice for anyone putting together an AR9 pistol or PCC and wants a barrel that won't need babysitting.

The Duty 9mm 8.5" Barrel's Steel and Finish

Every barrel in this line starts as certified 4150 steel, button rifled and stress relieved before it ever sees a finish. Faxon runs each one through air-gauge testing and magnetic particle inspection, then verifies headspace with hardened gauges before it leaves the shop. The nitride treatment goes both inside and outside the barrel, so you're getting corrosion protection where it actually matters, not just a coating for looks. An 11-degree target crown at the muzzle helps protect accuracy from dings and wear over time.

Setting Up Your Duty Series Blowback Barrel

This is a straight blowback design, so there's no gas port, gas block, or gas tube to worry about, which simplifies your build and cuts down on parts you'd otherwise need to source. The feed ramps are cut to work with both Glock and Colt pattern bolts and receivers, so it fits a wide range of AR9 lower configurations without extra fitting. Muzzle threads are a standard 1/2×28, so most 9mm-rated compensators, flash cans, or suppressor adapters will thread right on.

Twist Rate and Handling on the 8.5" Duty Barrel

The 1:10 twist rate is tuned to stabilize the full range of 9mm bullet weights, from lighter 115-grain loads up through 147-grain subsonics, so you're not locked into one specific type of ammo. Combined with the light tapered profile, the barrel keeps front-end weight down for faster target transitions, which matters on a compact 8.5" pistol build where balance makes a real difference in how it handles.

Key Specifications

  • Manufacturer: Faxon Firearms
  • Manufacturer Part Number: 15A910N8NLQ
  • UPC: 816341020788
  • Caliber: 9mm Luger
  • Barrel Length: 8.5"
  • Twist Rate: 1:10
  • Barrel Profile: Light Tapered / Pistol Caliber Taper
  • Material: 4150 CMV Steel
  • Finish: Salt Bath QPQ Nitride, inside and out
  • Muzzle Threads: 1/2×28 TPI
  • Crown: 11-degree target crown
  • Gas System: None – blowback operation
  • Feed Ramp Compatibility: Glock & Colt pattern
  • Weight: Approx. 0.81 lbs
  • Rifling: Button rifled
  • Warranty: Faxon Lifetime Guarantee

What’s Included

  • Faxon Duty Series 8.5" 9mm AR barrel with attached extension

Frequently Asked Questions

Does the Faxon Duty 9mm 8.5" barrel need a gas block or gas tube?

No. This barrel runs on a straight blowback design, so there's no gas port, gas block, or gas tube required. That actually simplifies your build since you've got fewer parts to source and fit.

Will this barrel work with my Glock magazines and bolt?

Yes, the feed ramps on this barrel are cut to work with both Glock and Colt pattern bolts and receivers. That gives you a lot of flexibility depending on which lower or magazine well configuration you're running.

What muzzle devices fit the 1/2×28 threads on this barrel?

Any 9mm-rated muzzle device threaded 1/2×28 TPI will fit, including most compensators, flash cans, and suppressor mounts. Just double check the bore diameter of whatever device you're running matches up with 9mm specs.

Can this 8.5" barrel handle heavier 147-grain 9mm loads?

The 1:10 twist rate on this barrel is designed to stabilize the full spread of common 9mm bullet weights, from 115-grain up through 147-grain. That gives you flexibility to run whatever load your build or ammo supply calls for without accuracy dropping off.

How does the nitride finish hold up over time?

The salt bath nitride treatment goes into the metal itself rather than sitting on top like a coating, so it holds up well to repeated cleaning and high round counts. It also adds a layer of corrosion resistance both inside the bore and on the exterior surface.

Is this barrel a direct swap for a factory AR9 barrel?

In most cases yes, as long as your upper receiver and bolt carrier are set up for pistol caliber carbine operation. Since it's a blowback barrel with no gas system, you won't need to modify your handguard or add any gas components during install.

Additional information

UPC

816341020788

Manufacturer

Manufacturer Part Number

15A910N8NLQ

Barrel Length

8.5''

Caliber/Gauge

9mm

Length

8.5''

Sights

No

Reviews

There are no reviews yet.

Be the first to review “Faxon Duty 9mm 8.5″ AR9 Barrel – 1:10 Twist Nitride”