$20.95
26 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Wilson Combat disconnecter is a straightforward part that plays a crucial role in your 1911's fire control system. This isn't a glamorous component, but it's absolutely essential. The disconnecter bridges the gap between your trigger bow and sear, allowing the trigger to control when your hammer falls. When the slide cycles back, the disconnecter gets pushed down by the slide, which frees up the sear to reset and catch the hammer as it cycles forward again. This prevent the gun from firing more than once per trigger pull.
This disconnecter meets or exceeds factory specifications, making it suitable for restoring any 1911 back to spec or dropping into a build. It connects and disconnects the relationship between your trigger and sear depending on whether the slide is in battery, maintaining the mechanical safety of your pistol. If you're dealing with a worn-out disconnecter or building from the ground up, this part ensures your trigger system operates correctly.
The disconnecter is precision-machined to tight tolerances and designed to last through thousands of rounds. Its simple design means there's minimal to go wrong, but like any wear part in the fire control group, it can benefit from being fresh if your pistol is aging or if you're reassembling everything. The part itself is small but critical—get this right and your trigger function follows.
While this part is designed to be a drop-in replacement, some fitting may occasionally be necessary depending on your specific 1911 frame and slide tolerances. Wilson Combat recommends professional gunsmith installation, especially if your gun has particular tolerances that differ from standard. The disconnect function should be tested thoroughly after installation to ensure it's operating smoothly without inhibiting your trigger pull or compromising safety.
The R30 is Wilson Combat's standard disconnecter that meets factory specifications and works reliably for most builds and repairs. The Bullet Proof version is machined to higher quality standards with lapped and polished engagement surfaces, designed for premium upgrades in competition or carry pistols. For restoring a gun to spec or a basic build, the R30 handles the job well.
Wilson Combat recommends having a qualified gunsmith handle installation. While the disconnecter is intended as a drop-in part, tolerances can vary between different 1911 manufacturers and frames, so minor fitting may occasionally be necessary. A gunsmith ensures proper function and safety.
The R30 is designed for standard 1911 platforms including Colt Government, Commander, and Officer's models, as well as quality clones. It may require minor fitting on some frames due to manufacturing tolerances. If you're installing it on a non-standard 1911 or one with unusual tolerances, a gunsmith can verify compatibility before installation.
The disconnecter is a critical part of the fire control system that connects and disconnects the trigger from the sear based on whether the slide is in battery. When the slide is forward, it allows the trigger to control the sear and hammer. When the slide cycles back, it disconnects them so the sear can reset and catch the hammer, preventing the gun from firing more than once per trigger press.
| UPC | 874218003173 |
|---|---|
| Manufacturer | |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.