Description
The Wolverine PBS-1 was built around AK-pattern rifles, but that does not mean it has to live on just one gun. This 1/2-28 thread insert (WV205) threads into the rear of the suppressor and opens the door to most standard .223/5.56 rifles and anything else wearing that common thread pitch. Swap the insert, torque it down, and the same can you run on your WASR can spend the weekend on an AR or a bolt gun.
How the Wolverine Insert System Works
Dead Air designed the Wolverine with a removable threaded insert at the back of the can, which is what makes the whole platform so flexible. Each insert pairs with a collar, and the good news here is that this 1/2-28 insert uses the same M14 collar that comes with the Wolverine from the factory. No extra collar to buy, no guesswork. Pull the old insert with the Wolverine wrench, drop this one in, and you are set. The insert is machined from steel with a matte black finish that matches the rest of the suppressor and holds up to hard use and repeated swaps.
Why Keep a 1/2-28 Insert on Hand
A 1/2-28 muzzle thread is about as common as it gets in the American rifle world, so this is the insert most Wolverine owners grab first. It gives you a stable, precisely aligned mounting surface, which matters when you are hanging a suppressor off the end of a barrel. One insert per thread pattern is a lot cheaper than one suppressor per rifle, and that is really the whole pitch. If your safe holds a mix of com-bloc guns and standard American rifles, this little piece of steel is what ties the collection together. Keep one in the range bag and your Wolverine stops being an AK-only can.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: WV205
- UPC: 810128160803
- Model: Wolverine PBS-1
- Thread Pitch: 1/2×28 Right Hand
- Compatible Suppressor: Dead Air Wolverine PBS-1
- Required Collar: M14 collar (included with the Wolverine suppressor)
- Material: Steel
- Finish: Matte Black
- Product Type: Suppressor Thread Insert
- Shipping Weight: 0.15 lb
What’s Included
- Dead Air Wolverine 1/2-28 thread insert (WV205)
Frequently Asked Questions
Do I need a separate collar for the Wolverine 1/2-28 thread insert?
No. The smaller thread inserts in the Wolverine lineup, including this 1/2-28 version, use the standard M14 collar that ships with the Wolverine suppressor. Only the M24 and M26 inserts call for a different collar, so if you are running a factory Wolverine you already have what you need.
What rifles will this insert let me mount my Wolverine on?
The 1/2-28 thread pitch covers most standard .223/5.56 rifles, which makes this the go-to insert for AR-platform guns and plenty of bolt actions with that thread pattern. Just confirm your barrel threads are a true 1/2-28 and that the muzzle is in good shape for direct thread mounting.
How do I swap thread inserts on the Wolverine?
The insert sits in the rear of the suppressor and comes out with the Wolverine wrench, which is sold separately and grips the varying insert socket sizes. Remove the old insert, thread this one in, and reinstall the collar. It takes a couple of minutes once you have done it, which is the whole point of the modular design.
Is the WV205 insert the same as a full suppressor mount?
Not quite. It is the threaded interface that lives inside the rear of the Wolverine, not a muzzle device that stays on the rifle. The insert determines what thread pitch your suppressor accepts, so one Wolverine can rotate across an AK, an AR, and other hosts just by changing inserts.






Reviews
There are no reviews yet.