$27.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Swapping the front cap on a Dead Air can is one of those jobs that goes from annoying to easy the moment you have the right tool in hand. The R-Series MK2 Front Cap Tool (DA208) is built for the current-production large pin front caps, with pins sized to drop straight into the holes on the cap face so you can break it loose and thread it back on without slipping or marring the finish. If you have ever tried to muscle a stubborn cap off with improvised tools, you know exactly why this belongs in your range bag.
The large pin MK2 version works with current front caps across most of the R-Series lineup, including the Wolfman, Sierra 5, Sandman series, Nomad series, Wolverine, Primal, and Pyro. One thing worth knowing before you order: older caps, generally those made around 2020 or earlier, use smaller diameter pin holes and need the MK1 small pin tool (DA203) instead. If your cap has the larger holes found on current production, the MK2 is the one you want. A quick look at the pin holes on your cap will tell you which camp you are in.
A handy detail that gets overlooked: the internally threaded side of the tool doubles as storage for the cap you just removed. Thread it on and it stays put instead of rolling under the bench or disappearing into the bottom of a range bag. At about 4.55 inches long and well under a pound, it takes up next to no room in a cleaning kit or field pouch.
Front caps are how you tune a Dead Air suppressor, whether you are swapping to a smaller bore cap for better sound performance, adding a flash hider cap, or just pulling the cap for cleaning. Carbon and heat cycles can make caps tight, and this tool gives you the leverage to deal with that properly. It is an inexpensive piece of kit that makes owning one of these cans a whole lot more pleasant.
It comes down to the age of your front cap. Current-production Dead Air front caps use larger pin holes and take this MK2 tool (DA208). Older caps, generally from around 2020 or earlier, have smaller holes and need the MK1 small pin version (DA203). Compare the pin holes on your cap face, and if the MK2 pins do not seat fully, the MK1 is your answer.
With a current large pin front cap installed, it covers most of the R-Series family, including the Wolfman, Sierra 5, the Sandman series, the Nomad series, Wolverine, Primal, and Pyro. Compatibility follows the cap itself rather than the suppressor body, so an older can wearing a new-style cap will still work with this tool.
Yes, and it is one of the best features. The internally threaded end of the tool accepts the removed cap, so you can thread it on and keep it secure while you clean the can or run a different cap. No more hunting for a loose cap at the bottom of your range bag.
You will be glad you have one. Front caps see a lot of heat and carbon, and they can seize up tighter than you would expect. The MK2 tool engages the pin holes squarely so you get real leverage without chewing up the cap face or the finish, which is exactly what tends to happen with pliers or improvised fixes.
| UPC | 810128161039 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DA208 |
| Color | Black |
| Length | 4.5500 |
| Model | |
| Product Type | Tool |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.