$67.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If low light shooting is part of your routine, the standard front cap on your can is leaving performance on the table. The Dead Air R-Series Flash Hider Front Cap swaps onto compatible R-Series Sandman and Pyro suppressors and knocks visible muzzle flash down by 50 to 75 percent. For anyone running night vision, hunting hogs after dark, or just tired of the fireball off a short barrel, that difference is easy to appreciate the first time you touch off a round after sunset.
Beyond the flash reduction, sizing the front cap down to .223 Rem / 5.56 NATO does a couple of things a universal bore opening can't. The tighter exit reduces first round pop, and it can trim the muzzle reading by roughly 1 to 3 dB. Small changes on paper, but they add up to a quieter, cleaner-shooting suppressor without adding meaningful length or weight to your setup. At just 1.3 inches, it keeps the package compact.
Dead Air machines this cap from 17-4 stainless steel, the same tough, heat-tolerant alloy used throughout serious suppressor construction, then coats it in black nitride for wear and corrosion resistance. It matches the look of your can and shrugs off the heat and carbon that come with hard use. Installation is a simple front cap swap, so you can go back and forth between this and your standard cap depending on the day's work.
This one is for owners of R-Series Sandman and Pyro units shooting .223 or 5.56 who want their suppressor dialed in for the platform they run most. SBR owners in particular will notice the payoff, since short barrels throw the most flash. It is one of those small upgrades that makes a noticeable difference every time you shoot, especially once the light drops off.
This DA206 cap is made for Dead Air's R-Series Sandman and Pyro units. It is not interchangeable with older non-R-Series front caps, so double check which generation your suppressor is before ordering. If you have a legacy Sandman, Dead Air makes a separate cap for those.
Dead Air rates it at a 50 to 75 percent reduction in visible flash compared to the standard front cap. Results vary with barrel length and ammo, with shorter barrels seeing the most dramatic improvement. It is a popular pick for SBRs and low light or night vision work.
It helps a bit. Sizing the bore opening down to 5.56 reduces first round pop and can lower the muzzle reading by roughly 1 to 3 dB. It will not transform the sound signature, but it tightens up performance on 5.56 hosts compared to running a larger caliber opening.
No. Once the 5.56 cap is on, the suppressor is limited to .223 Rem / 5.56 NATO and smaller bore diameters. Firing a larger caliber through it would strike the cap, so swap back to the appropriately sized cap before changing hosts.
| UPC | 810128160957 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DA206 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Length | 1.3 |
| Model | |
| Package Height | 0.8 |
| Package Width | 4.5 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.