Description
The Odessa-9 ships set up for tilting-barrel pistols, and that booster assembly is great on a handgun. Move that same can over to a pistol caliber carbine or any fixed-barrel 9mm, though, and the recoil booster becomes unnecessary moving parts. That is exactly what this fixed mount solves. It swaps in place of the piston and spring assembly, giving you a solid, direct connection between the suppressor and your host so nothing is cycling or shifting under fire.
Why the Odessa-9 Fixed Mount Earns Its Spot in Your Range Bag
This version is cut for M13.5x1LH threads, the left-hand metric pitch you'll find on a lot of European-pattern 9mm barrels. If your host wears that thread, this mount threads on clean and torques down with full engagement, so your point of impact stays consistent from range trip to range trip. Fixed mounts also tend to be simpler to keep clean than a booster, since there is no piston or spring to strip down and scrub after a suppressed session.
Built to Dead Air Standards
Dead Air has a well-earned reputation for machining tolerances that hold up, and this mount follows suit. It is precisely manufactured from durable materials with a black finish that matches the rest of the Odessa-9 lineup. Swapping between this fixed mount and your original piston assembly is quick, so one suppressor can pull double duty between your carry-style pistol and your carbine without much fuss.
Matching the Odessa Fixed Mount to Your Setup
One thing worth double-checking before you order: this mount is for fixed-barrel firearms only, think AR-9s, MPX, Scorpion, Vector and similar platforms where the barrel does not move during cycling. Tilting-barrel handguns still need the standard piston to run reliably. And confirm your muzzle threads, because M13.5x1LH and 1/2×28 are not interchangeable. Get those two details right and this little part turns your Odessa-9 into a proper dedicated carbine can whenever you want it to be.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DD112
- UPC: 810128161206
- Thread Pitch: M13.5x1LH
- Caliber Compatibility: 9mm
- Compatible Suppressor: Dead Air Odessa-9
- Mount Type: Fixed / direct thread (replaces booster assembly)
- Intended Host Type: Fixed-barrel firearms and pistol caliber carbines
- Color: Black
- Shipping Weight: 0.105 lbs
What’s Included
- Dead Air Odessa-9 Fixed Mount, M13.5x1LH (DD112)
Frequently Asked Questions
Will the Odessa Fixed Mount work on my tilting-barrel pistol?
No, this one is strictly for fixed-barrel firearms like AR-9s, the SIG MPX, CZ Scorpion, Kriss Vector and similar platforms. Tilting-barrel handguns need the standard Odessa-9 piston and booster assembly to cycle reliably. Keep your original piston around if you plan to swap the suppressor between hosts.
How does this mount attach to my Odessa-9 suppressor?
It replaces the booster assembly, which is the piston and spring setup that comes standard on the Odessa-9. You remove that assembly and install this solid mount in its place, then thread the suppressor directly onto your barrel. Swapping back and forth takes just a couple of minutes.
How do I know if I need the M13.5x1LH version or the 1/2×28 version?
Check your barrel's muzzle threads. M13.5x1LH is a left-hand metric thread common on many European-pattern 9mm barrels, while 1/2×28 is the standard American pitch found on most AR-9s and threaded 9mm barrels made in the US. The two are not interchangeable, so verify your thread spec before ordering.
Does a fixed mount change how the suppressor performs?
Sound performance stays essentially the same, but you gain a more rigid connection since there is no piston moving under recoil. That tends to help with point-of-impact consistency on carbines, and cleanup is simpler because there is no booster assembly to disassemble and scrub after shooting.







Reviews
There are no reviews yet.