Description
The SCAR 17 has a notoriously thin barrel shoulder, and plenty of muzzle devices just don't seat right on it. Dead Air solved that with the DA305, a SCAR-specific version of their KeyMo flash hider that indexes off the muzzle crown instead of the shoulder. That's the whole reason this variant exists, and it's why SCAR owners should grab this one instead of the standard DA302, which has a deeper mounting cavity meant for conventional barrels.
Why the KeyMo Flash Hider Doesn't Ping
Most three-prong flash hiders ring like a tuning fork after every shot. Dead Air's patent-pending design uses mass-shifted, equal-length tines to break up that harmonic, so you get real flash suppression without the annoying chime. The 5/8-24 threaded version is bored to .30 caliber, making it a natural match for the SCAR 17's 7.62 NATO barrel. It's machined from 4140 heat-treated alloy steel with a Black Nitride finish, so it'll shrug off hard use and heat cycles whether you run it bare or under a can. A pre-drilled pin and weld hole sits at the 6 o'clock position for anyone doing a permanent install.
KeyMo Mounting for Your Suppressor
Beyond taming flash, this piece is your gateway to running suppressed. It serves as the mount for Dead Air's Sandman-L, Sandman-S, and Sandman-K, plus KeyMo-equipped Nomad-30, Nomad-Ti, and Primal cans, and even the Wolfman with a KeyMicro adapter. The KeyMo interface locks up tight and repeatable, and when it's time to come off, the suppressor releases without carbon-locking to the mount. That's a big deal on a hard-running gas gun like the SCAR that gets filthy fast.
A Smart Upgrade for the SCAR 17
At around 4 ounces and 2.7 inches long, it adds minimal bulk up front, and Dead Air backs it with a lifetime warranty. If you own a SCAR 17 and a KeyMo-compatible suppressor is anywhere in your plans, this is the muzzle device that ties the whole setup together.
Key Specifications
- Manufacturer: Dead Air Silencers
- Model: KeyMo Flash Hider (SCAR 17)
- Manufacturer Part Number: DA305
- UPC: 810128160476
- Caliber: .30 Caliber (7.62 NATO / .308)
- Thread Pattern: 5/8"x24
- Material: 4140 Heat-Treated Alloy Steel
- Finish: Black Nitride
- Length: 2.70 in
- Weight: Approx. 4.0 oz
- Mount Compatibility: KeyMo and KeyMicro equipped suppressors
- Pin & Weld Hole: Pre-drilled at 6 o'clock position
- Color: Black
- Warranty: Lifetime
What’s Included
- Dead Air KeyMo Flash Hider, 5/8-24 (SCAR 17)
Frequently Asked Questions
What's the difference between the DA305 and the standard DA302 KeyMo flash hider?
It comes down to how each one seats on the barrel. The DA305 has a shallower mounting cavity that indexes off the SCAR 17's muzzle crown, since the SCAR's barrel shoulder is too thin for a standard mount to shoulder against properly. The DA302 is cut deeper to seat on a conventional barrel shoulder. If you're running a SCAR 17, the DA305 is the one you want.
Which suppressors work with the KeyMo Flash Hider?
It mounts the Dead Air Sandman-L, Sandman-S, and Sandman-K directly, along with the Nomad-30, Nomad-Ti, and Primal when they're fitted with a KeyMo adapter. The Wolfman works too with a KeyMicro adapter. Some SilencerCo cans equipped with a KeyMo adapter will also mount up.
Does this flash hider ping like other three-prong designs?
No, and that's one of its best tricks. Dead Air's mass-shifted, equal-length tine design breaks up the harmonic ring that makes most pronged flash hiders chime after each shot. You get the flash reduction of a prong-style device without the tuning fork sound.
Can I pin and weld the DA305 to my barrel?
Yes. It comes with a pre-drilled pin and weld hole at the 6 o'clock position, which makes a permanent installation straightforward for your gunsmith. Just make sure your setup is exactly how you want it before making it permanent.







Reviews
There are no reviews yet.