Description
Anyone who has run a three-prong flash hider knows the tuning-fork ring that follows every shot. Dead Air solved that with the KeyMo Flash Hider. The patent-pending design uses mass-shifted, equal-length tines that break up burning gases at the muzzle without producing that telltale ping, so you get real flash reduction in low light without your muzzle device humming at you between shots.
More Than a Flash Hider, It's Your Suppressor Mount
The real draw here is the KeyMount interface. This 5/8"-24 version is bored for .30 caliber, making it right at home on .308 Win, 7.62 NATO, 6.5 Creedmoor, and .300 Blackout barrels with standard threading. Thread it on, and you have a quick-attach point for the Sandman-S, Sandman-K, and Sandman-L, plus KeyMo-equipped Nomad-30 and Primal cans. It even plays nice with the KeyMicro-equipped Wolfman. One smart detail worth calling out: the design resists carbon locking, so your suppressor comes off the mount cleanly even after long range days instead of seizing up like some competing systems.
Built Like Dead Air Builds Everything
Machined from 4140 heat-treated alloy steel with a black nitride finish, this thing shrugs off heat, carbon, and weather. At 2.70 inches long and around 4 ounces, it adds meaningful length for anyone looking to bring a shorter barrel up to spec, and Dead Air pre-drilled a pin and weld hole at the 6 o'clock position to make permanent attachment straightforward for your gunsmith.
Who Should Grab the KeyMo Flash Hider
If you already own a Dead Air can or plan to pick one up, mounts like this are the smart play. Buy one for each rifle in the safe and your suppressor moves between hosts in seconds with consistent lockup and minimal point-of-impact shift. Even running unsuppressed, it earns its spot on the barrel as a genuinely effective flash hider.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA302
- UPC: 810128160445
- Model: KeyMo Flash Hider
- Thread Pattern: 5/8"-24
- Bore Diameter: .30 Caliber
- Overall Length: 2.70 in
- Weight: Approx. 4.0 oz
- Material: 4140 Heat-Treated Alloy Steel
- Finish: Black Nitride
- Mounting System: Dead Air KeyMount (KeyMo)
- Pin & Weld Hole: Pre-drilled at 6 o'clock position
- Suppressor Compatibility: Sandman-S/K/L, KeyMo Nomad-30, KeyMo Primal, KeyMicro Wolfman
What’s Included
- Dead Air KeyMo Flash Hider 5/8"-24
Frequently Asked Questions
Which suppressors work with the Dead Air KeyMo Flash Hider?
It mounts the full Sandman series (Sandman-S, Sandman-K, and Sandman-L) directly, plus the Nomad-30, Nomad-Ti, and Primal when those are fitted with a KeyMo adapter. It also works with the Wolfman running a KeyMicro adapter. If your can uses a HUB mount, a KeyMo HUB adapter gets you there too.
Will the 5/8-24 KeyMo Flash Hider fit my 6.5 Creedmoor or .300 Blackout barrel?
Yes. This version has a .30 caliber bore and 5/8"-24 threads, which covers .308 Win, 7.62 NATO, 6.5 Creedmoor, .300 Blackout, and similar cartridges on standard-threaded barrels. Just confirm your barrel threading matches before ordering, since some rifles use different thread pitches.
Does the KeyMo Flash Hider really eliminate the ping sound?
It does. Traditional pronged flash hiders ring like a tuning fork after each shot, and Dead Air's mass-shifted equal-length tine design was engineered specifically to kill that resonance. You get the flash suppression of an open-tine design without the ringing, suppressed or not.
Will my suppressor carbon-lock onto this mount over time?
That's one of the KeyMo system's strong points. The mount geometry is designed so carbon buildup doesn't seize the suppressor in place, meaning it comes off by hand even after extended shooting sessions. A quick brush-off of the mount surfaces during regular cleaning keeps everything running smooth.





Reviews
There are no reviews yet.