Description
Big-bore rifles like the .458 SOCOM and .450 Bushmaster deserve the same quick-detach convenience as everything else in the safe, and that is exactly what the Dead Air KeyMo 46 delivers. This .578×28 threaded brake is bored for calibers up to .458 and works as the mounting point for any Dead Air suppressor running the KeyMo system. Sandman series cans attach directly, while the Nomad line hooks up with a KeyMo adapter, and HUB-pattern suppressors like the Wolverine can join the party with the right adapter installed. Twist the can on, lock it up, and you are back to shooting with a mount that returns to the same position every time.
No Shims, No Carbon Lock, No Drama
One of the smarter details on the KeyMo 46 is the muzzle-seating design, which does away with shims completely. That is a real advantage on barrels with little or no shoulder, where timing a traditional brake can turn into an afternoon project. Dead Air also placed a sealed taper forward of the locking channels, so carbon buildup stays out of the interface and your suppressor comes off by hand instead of needing a wrench and some choice words. The porting is engineered to distribute gas and pressure evenly inside the can, which helps the suppressor perform consistently and extends its working life.
Built Like a Dead Air Mount Should Be
The brake is machined from 4140 heat-treated chromoly steel and finished in black nitride, a combination that shrugs off the pressure and heat of living inside a blast chamber round after round. At roughly a quarter pound it will not throw off your rifle's balance either.
Running the KeyMo 46 Without a Can
Pull the suppressor off and this piece keeps earning its spot. The braking ports cut felt recoil and muzzle rise noticeably, with less concussion than a lot of aggressive competition brakes throw at the shooter next to you. For thumper cartridges that beat you up at the bench, that alone makes it worth the muzzle real estate.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA160
- UPC: 810128161541
- Model: KeyMo (KeyMo 46)
- Product Type: Muzzle Brake / Suppressor Mount
- Thread Pattern: .578"x28
- Bore / Caliber Rating: .46 cal (up to .458)
- Material: 4140 HT Chromoly Steel
- Finish: Black Nitride
- Color: Black
- Weight: 0.25 lb
- Mount System: Dead Air KeyMo Quick-Detach
- Shim Requirement: None (muzzle-seating design)
What’s Included
- Dead Air KeyMo 46 Muzzle Brake .578×28
Frequently Asked Questions
Do I need shims to install the Dead Air KeyMo 46 muzzle brake?
No. The KeyMo 46 uses a muzzle-seating design that indexes off the muzzle itself, so no shims or crush washers are needed. That makes it a great fit for barrels with little or no shoulder where timing a conventional brake gets tricky.
Which suppressors work with the KeyMo 46 brake?
It works with any Dead Air suppressor running the KeyMo mounting system. Sandman series cans mount directly, Nomad series suppressors need a KeyMo adapter, and HUB-pattern cans like the Wolverine can run it with a HUB-to-KeyMo adapter. Just make sure the suppressor itself is rated for the caliber you are shooting.
Can I use the KeyMo muzzle brake without a suppressor attached?
Absolutely, and it does that job well. The ported design cuts felt recoil and muzzle rise with less concussion than most traditional brakes, so the rifle stays comfortable to shoot with the can off. Many owners run it full time as a standalone brake.
What calibers is the DA160 rated for?
The DA160 has a .46 caliber bore and is rated for calibers up to .458, making it a natural match for .458 SOCOM, .450 Bushmaster, and similar big-bore cartridges on .578×28 threaded barrels. Keep in mind the suppressor you mount on it needs its own appropriate caliber rating.







Reviews
There are no reviews yet.