0
0

Dead Air HUB to P-Series Adapter SD502 – 4140 Steel, QPQ Nitride

UPC: 810128160230

$70.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The HUB pattern did a lot to standardize suppressor mounting, but Dead Air's P-Series accessories run on their own smaller thread. This little adapter bridges that gap. Thread it into the back of any HUB-equipped can and the 1.375×24 socket steps down to a 1.203×28 interface, which means your suppressor can now run Dead Air's booster assembly, 3-Lug mount, Key-Micro, and P-Series fixed mounts. If you already own a Primal, you know this part, since it's the exact same adapter Dead Air packs in with that suppressor.

What the HUB to P-Series Adapter Unlocks

The practical payoff here is versatility. Want to run a big multi-caliber can like the Primal or a SilencerCo Hybrid 46 on a pistol? Add this adapter and a booster assembly and you're in business. Got an MP5 or another 3-lug host? Same story with the 3-Lug mount. It's one of those inexpensive parts that turns a rifle-only setup into something you can move across half your safe. Any suppressor with a standard HUB mount, the same interface sometimes called Bravo or Omega pitch, will accept it.

Built Like a Dead Air Part Should Be

There's nothing delicate about it. The adapter is machined from 4140 alloy steel and treated with a QPQ nitride finish, the same salt bath process used on barrels and hard-use suppressor components, so it shrugs off carbon, heat, and corrosion. At just 0.545 inches long and about an ounce, it adds essentially nothing to the length or weight of your setup.

Getting the Most From Your SD502

Install is as simple as it gets: remove your existing HUB mount, thread this in, snug it down, and attach whichever P-Series accessory fits your host. As always, make sure your suppressor is rated for the caliber you plan to shoot through it. Keep the threads clean and a dab of anti-seize goes a long way if you swap mounts often.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Manufacturer Part Number: SD502
  • UPC: 810128160230
  • Model: HUB to P-Series Adapter
  • Product Type: Suppressor Mount Adapter
  • Outside Threads: 1.375×24 (HUB)
  • Inside Threads: 1.203×28 (P-Series)
  • Material: 4140 Alloy Steel
  • Finish: QPQ Black Nitride
  • Color: Black
  • Length: 0.545"
  • Weight: Approx. 1 oz
  • Compatibility: Any 1.375×24 HUB-equipped suppressor

What’s Included

  • Dead Air HUB to P-Series Adapter

Frequently Asked Questions

Will the Dead Air HUB to P-Series Adapter work with suppressors from other brands?

Yes, as long as the suppressor uses the standard 1.375×24 HUB mounting interface. That covers a wide range of cans beyond Dead Air's own lineup, including options like the SilencerCo Hybrid 46 and Griffin Bushwhacker. If your can takes standard HUB mounts, this adapter threads right in.

What P-Series accessories can I run once this adapter is installed?

The adapter's internal 1.203×28 threads accept Dead Air's P-Series accessories, including the booster assembly for pistols, the 3-Lug mount, the Key-Micro, and P-Series fixed mounts. It's the same interface used on the Ghost and Wolfman, so that whole accessory ecosystem opens up to your HUB suppressor.

Is this the same adapter that comes with the Dead Air Primal?

It is. Dead Air ships this exact adapter with the Primal, and the SD502 is sold separately for folks who need a spare or want to add P-Series mounting to another HUB can. Buying one for a second suppressor saves you from swapping it back and forth.

Do I need any special tools to install the HUB to P-Series Adapter?

Nothing exotic. It threads into the HUB socket by hand and just needs to be snugged down securely before you attach your P-Series mount. Keeping the threads clean and using a touch of anti-seize will make future swaps easier, especially if you move it between hosts regularly.

Additional information

UPC

810128160230

Manufacturer

Manufacturer Part Number

SD502

Color

Black

Length

0.545"

Model

Product Type

Mount

Shipping Weight

0.07

Reviews

There are no reviews yet.

Be the first to review “Dead Air HUB to P-Series Adapter SD502 – 4140 Steel, QPQ Nitride”