Description
Running a SIG rifle or a barrel cut with the SIG taper behind your 5/8×24 threads? This is the piece that gets your HUB suppressor mounted right. The Dead Air HUB Direct Thread Mount (LT315) threads into any silencer with the industry standard 1.375×24 HUB pattern, then screws directly onto your tapered muzzle. That taper interface matters, since it seats the mount square against the shoulder and keeps everything centered, which helps with alignment and cuts down on the mount loosening up during longer strings of fire.
Built Like Everything Else Dead Air Makes
The mount is machined from 4140 heat-treated alloy steel and wears a QPQ black nitride finish, so it shrugs off carbon, heat, and moisture without complaint. At just 0.765 inches long and around 1.6 ounces, it barely adds anything to your setup. Most of the mount tucks up inside the suppressor body, keeping your overall length short and the balance close to the muzzle where you want it.
Wide Compatibility Across the HUB World
Because HUB threading has become the common language for big-bore suppressor mounting, this insert works with far more than just Dead Air cans. The Nomad-30, Nomad Ti, Primal, Sierra-5, Lazarus 6, and Sandman X are all fair game, along with HUB and Bravo pattern suppressors from plenty of other manufacturers. One mount, a whole lot of options.
Why Pick the SIG Taper Version
Keep in mind this mount is specifically cut for muzzles with the SIG taper. If your barrel has standard 5/8×24 threads without the taper, Dead Air makes a separate mount for that, so double check your barrel before ordering. For bolt guns and precision rifles wearing tapered muzzle threads, this is a clean, no-fuss way to run your can direct thread and skip the extra weight of a muzzle device mounting system.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: LT315
- UPC: 810128160377
- Muzzle Thread Pitch: 5/8×24 SIG Taper
- Suppressor Thread Pattern: 1.375×24 (HUB Compatible)
- Material: 4140 HT Alloy Steel
- Finish: QPQ Black Nitride
- Color: Black
- Overall Length: 0.765 in
- Weight: 1.62 oz
- Mount Type: Fixed Direct Thread Insert
- Caliber Rating: .30 Caliber
What’s Included
- Dead Air HUB Direct Thread Mount, 5/8×24 SIG Taper (LT315)
Frequently Asked Questions
Which suppressors does the Dead Air HUB Direct Thread Mount fit?
It threads into any suppressor with the industry standard 1.375×24 HUB pattern. That covers Dead Air models like the Nomad-30, Nomad Ti, Primal, Sierra-5, Lazarus 6, and Sandman X, plus HUB and Bravo compatible cans from many other brands. If your suppressor takes HUB mounts, this will work.
Will this mount work on a standard 5/8×24 barrel without a SIG taper?
No, this version is machined specifically for muzzles cut with the SIG taper behind the 5/8×24 threads. On a standard non-tapered barrel it won't seat correctly, which can cause alignment issues. Dead Air offers a standard 5/8×24 version of this mount for regular threaded barrels.
What's the advantage of a tapered mount over a regular direct thread mount?
The taper acts as a self-centering interface between the mount and the barrel shoulder. It seats the mount squarely, improves concentricity, and resists loosening under heat and recoil better than a flat shoulder alone. That's why SIG and other precision rifle makers cut their barrels this way.
How does the HUB Direct Thread Mount install?
It threads into the rear of your HUB-compatible suppressor via the 1.375×24 threads, then the whole assembly screws onto your barrel like any direct thread can. Most of the mount sits inside the suppressor body, so it adds very little length. A drop of thread locker on the HUB threads is a common practice if you plan to leave it in one suppressor permanently.




Reviews
There are no reviews yet.