$63.99
53 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a Dead Air pistol can on a PCC or another fixed-barrel gun? A booster assembly is just dead weight there. Blowback and fixed-barrel actions don't need a piston and spring cycling behind the can, and leaving that assembly in place adds length and extra parts you have to keep track of. The P-Series Fixed Mount in 1/2×28 solves that with one piece of hardware. It replaces the entire piston and spring setup, threads straight onto your barrel, and gives your suppressor a rock-solid, repeatable mounting point.
This mount works with the Ghost-M and Ghost 45M, Wolfman, Wolf-9SD, Primal, and the Mojave 9 and Mojave 45. If your suppressor takes Dead Air's P-Series interface, this drops right in. The 1/2×28 thread pitch covers the most common 9mm hosts out there, so it's a natural fit for an AR-9, SIG MPX, CZ Scorpion, Kriss Vector, or just about any fixed-barrel 9mm carbine with standard threads. Steel construction and a matte black Cerakote finish mean it holds up to heat, carbon, and regular mounting cycles without complaint.
You could technically run a piston with a fixed barrel spacer and get the same lockup, but the dedicated fixed mount is the cleaner way to do it. It's shorter overall, which keeps your suppressed setup more compact and easier to swing around. It also swaps three components for one, so there's less to lose in the range bag and less to fiddle with during install. Thread it on, torque your can down, and get back to shooting.
If you split time between a pistol host and a carbine, this is the piece that makes swapping painless. Keep your booster set up for the handgun, keep this mount dedicated to the fixed-barrel gun, and moving the can between the two takes seconds instead of a full teardown.
It fits Dead Air's P-Series pistol suppressor lineup, including the Ghost-M, Ghost 45M, Wolfman, Wolf-9SD, Primal, and the Mojave 9 and Mojave 45. It replaces the booster assembly in the rear of the can, so any suppressor built on that P-Series interface will accept it. If your can uses a different mounting system, this won't be the right part.
Both will work on a fixed-barrel gun, but the dedicated mount is shorter and simpler. It condenses the piston, spring, and spacer into a single piece, which trims overall length and gives you fewer small parts to keep track of. Installation is also cleaner since you're just threading one component onto the barrel.
No, this mount is strictly for fixed-barrel hosts like an AR-9, CZ Scorpion, SIG MPX, or Kriss Vector. Tilting-barrel handguns, like most 9mm and .45 pistols, need the booster assembly with a piston to cycle reliably. Keep the piston for your pistol and use this mount on the carbine side.
The 1/2×28 pitch is the standard for most 9mm threaded barrels in the US, including the majority of AR-9s and 9mm PCCs. Check your barrel's markings or manual to confirm before ordering. Dead Air also makes this mount in other pitches like 1/2×36, 5/8×24, M13.5×1 LH, and M18x1 LH if your host runs something different.
| UPC | 810128161138 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DA410 |
| Caliber/Gauge | Fixed Mount |
| Chokes Included | 1/2"-28 tpi |
| Color | Black |
| Length | 7 |
| Model | |
| Package Height | 1.0 |
| Package Width | 4.0 |
| Product Type | Mount |
| Shipping Weight | 0.13 |
You must be logged in to post a review.
Reviews
There are no reviews yet.