$46.99
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The front cap is one of those parts you never think about until you need one. Whether you dinged yours getting the can out of a range bag, want a spare for the safe, or you swap between calibers and need to put your Nomad back in its .30 cal configuration, the Dead Air DA209A R-Series front cap gets it done. This is the same style cap the Nomad-30 wears from the factory, opened up for .30 caliber bullets and finished in black to match the rest of the suppressor.
Dead Air built the Nomad line around modularity, and the front cap is a big part of that. Swapping caps is how you tune the personality of the can. A properly sized aperture like this .30 cal opening helps with sound performance, keeps muzzle flash in check, and plays a role in how much backpressure comes back through the action. If you have been running an oversized cap on a smaller bore, dropping in a caliber-matched cap like this one tightens things up noticeably.
The front cap lives at the loudest, hottest end of your suppressor, so it needs to be tough. This cap is machined from steel with a durable black finish that shrugs off carbon and heat cycles. Installation is simple, and once it is torqued down it stays put through extended range sessions.
At the end of the day, this is a small part that punches above its weight. It is a direct fit for Nomad series suppressors set up for .30 caliber, it restores your can to factory spec if your original cap gets chewed up, and it is cheap insurance compared to sending a suppressor back for service. If you own a Nomad, having one of these in the parts drawer just makes sense.
Yes, this R-Series front cap is made for the Nomad series of suppressors and is the .30 cal configuration that matches how the Nomad-30 ships from the factory. If your original cap is worn or damaged, this is a direct replacement. Just make sure your can is an R-Series Nomad style suppressor before ordering.
The front cap aperture affects three main things: sound performance, muzzle flash, and backpressure. Running a cap that matches your bore diameter, like this .30 cal version, generally gives you better suppression than an oversized opening. It is one of the easiest ways to tune how your Nomad behaves on a given host.
No. The front cap on its own is a replacement accessory part, not a serialized suppressor component, so it ships like any other accessory. The suppressor itself is the registered item, and this cap simply threads onto a can you already own.
Yes, the Nomad-30 is rated for sub-calibers like 5.56 and 6.5mm, and those will pass through the .30 cal aperture just fine. You give up a little suppression compared to a caliber-matched cap, but it works safely. Never shoot a bullet larger than the cap opening, though, so keep this one on .30 caliber and under.
| UPC | 810128162487 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DA209A |
| Caliber/Gauge | .30 Caliber |
| Color | Black |
| Length | 7 |
| Model | |
| Package Height | 0.5 |
| Package Width | 4.5 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.041 |
You must be logged in to post a review.
Reviews
There are no reviews yet.