Description
Got a suppressor with the SilencerCo Alpha style 1.125×28 pistol thread socket and want to run it on hosts wearing Dead Air Xeno muzzle devices? That is exactly what the DA458 Xeno Adapter is built for. Thread it into an Omega 9K, Octane, Rugged Obsidian, or other cans sharing that Legacy pistol thread pitch, and you have a taper mount setup with rock-solid repeatability and consistent return to zero. At just 1.44 ounces and 1.125 inches long, it barely adds anything to the front of your rifle or pistol.
Why the Xeno Adapter Earns Its Spot
Dead Air made a smart call with the left-hand threads where the adapter meets the muzzle device. When you spin your suppressor off the host, the adapter stays put in the can instead of backing out with it, and you can confirm everything is still torqued when you mount up. The Xeno system also positions the muzzle device shallow in the blast chamber rather than burying it deep, which spreads out erosion instead of hammering your front baffles in one spot. Over a high round count, that pays off in suppressor life and sound performance.
Nitrided 4140 Steel That Will Not Gall
The adapter is machined from heat-treated 4140 alloy steel with a QPQ black nitride finish. That combination gives you serious surface hardness and corrosion resistance, and unlike uncoated stainless mounts, it resists galling and seizing. Carbon and copper fouling scrubs off easier too, so cleaning day is less of a chore. Tooling surfaces accept a 1-1/8 inch socket and a 1.5 inch hook spanner, and they stay accessible even with the suppressor fully assembled, handy if your can lives on the gun for months at a time.
Setting Up the DA458
You will need a Dead Air Xeno muzzle device on the host firearm, sold separately, such as the Xeno Flash Hider, Closed-Tine Flash Hider, or Xeno Brake. Keep in mind that fitment of the muzzle device inside the suppressor depends on the size of your can's blast chamber, so it is worth checking Dead Air's fitment guide for your specific suppressor before ordering.
Key Specifications
- Manufacturer: Dead Air Silencers
- Model: Xeno Adapter (Legacy)
- Manufacturer Part Number: DA458
- UPC: 810128160278
- Suppressor Thread Socket: 1.125×28 (SilencerCo Alpha / Legacy)
- Muzzle Device Threads: Left-hand (mates with Xeno muzzle devices)
- Material: 4140 HT alloy steel
- Finish: QPQ black nitride
- Overall Length: 1.125 inches
- Weight: 1.44 oz
- Tool Interface: 1-1/8 inch socket, 1.5 inch hook spanner
- Mount Type: Xeno taper mount
What’s Included
- Dead Air Xeno Adapter DA458 (Legacy)
Frequently Asked Questions
Which suppressors does the DA458 Xeno Adapter fit?
The DA458 fits suppressors with the 1.125×28 SilencerCo Alpha style pistol thread socket. That covers cans like the SilencerCo Omega 9K and Octane series, Rugged Obsidian models, and some Griffin pistol suppressors that share the same thread pitch. If your can uses a 1-3/8-24 HUB socket instead, you want the DA455 version.
Do I need anything else to use the Xeno Adapter?
Yes, you need a Dead Air Xeno muzzle device on your host firearm, and those are sold separately. Compatible options include the Xeno Flash Hider, Xeno Closed-Tine Flash Hider, and Xeno Muzzle Brake. Also check that your suppressor's blast chamber has room for the muzzle device, since some pistol-optimized cans run tighter chambers.
Why does the Xeno Adapter use left-hand threads?
The left-hand threads between the adapter and the muzzle device keep the adapter from unthreading out of your suppressor when you remove the can from the host. It also lets you verify the mount is still snug every time you install the suppressor. It is a simple design choice that prevents a common headache with quick-attach systems.
Is the nitrided 4140 steel really better than stainless for a mount?
For this application, yes. The heat-treated 4140 with QPQ nitride finish is very hard, resists corrosion well, and does not gall or seize the way uncoated 17-4 stainless parts can after heavy carbon buildup. Fouling also comes off easier during cleaning, which lowers the chance of damaging threads.





Reviews
There are no reviews yet.