Description
The Galil ARM has one of those thread pitches that almost nothing on the market fits, and that M13x1 right-hand muzzle thread has left plenty of owners running their rifle loud. This insert solves it. Drop the WV207 into your Dead Air Wolverine PBS-1 and the suppressor threads right onto IMI Galil pattern barrels, no gunsmithing, no permanent modifications, nothing bolted on for good.
How the Wolverine Insert System Works
The whole idea behind the Wolverine is that the mount is not fixed. The thread insert sits inside the rear of the can and is fully removable and interchangeable, so the same suppressor can jump between an AK, a VZ58, an HK pattern rifle, or in this case a Galil, just by swapping inserts. This 13mm right-hand version pairs with the standard M14 collar that already comes with the Wolverine, so there is no extra collar to hunt down. Pull one insert, drop in another, and you are back on the range with a different rifle.
Built Like the Rest of the Dead Air Lineup
This is a steel insert with a black finish, machined to the same standard as the Wolverine itself. It is a small part, but it is the part doing the work of keeping your can concentric and locked up on the muzzle, and Dead Air did not cut corners on it. Thread engagement is clean and repeatable, which matters when you are torquing a suppressor onto a rifle that was never designed with one in mind.
Who Should Grab the WV207
If you own a Wolverine and an IMI pattern Galil ARM, this is the missing link between the two. Galil owners do not have many suppressor mounting options, and being able to fold one into an existing Wolverine setup instead of buying a dedicated can is a big win. Grab the insert, keep your other inserts in the range bag, and let one suppressor do the job of several.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: WV207
- UPC: 810128160827
- Model: Wolverine
- Thread Pitch: M13x1 Right Hand
- Fits: Dead Air Wolverine PBS-1 Suppressor
- Firearm Compatibility: IMI Galil ARM pattern rifles
- Collar Required: Standard M14 collar (included with Wolverine suppressor)
- Material: Steel
- Finish: Black
- Product Type: Silencer Accessory / Thread Insert
- Shipping Weight: 0.14 lb
What’s Included
- Dead Air Wolverine 13mm RH Galil thread insert (WV207)
Frequently Asked Questions
Do I need a separate collar to use the WV207 Galil insert?
No. The 13mm RH insert is one of the smaller thread sizes, so it uses the standard M14 collar that already ships with the Wolverine PBS-1 suppressor. Only the M24 and M26 inserts call for different collars.
Which rifles does the Wolverine 13mm RH thread insert fit?
This insert is cut for the M13x1 right-hand muzzle threads found on IMI Galil ARM pattern rifles. It is a fairly uncommon thread pitch, which is exactly why Dead Air made a dedicated insert for it. If your rifle has a different thread, Dead Air offers a full range of inserts covering most AK, VZ58, HK, and AR thread patterns.
Can I swap inserts in my Wolverine myself?
Yes, that is the whole point of the system. The inserts are removable and interchangeable, so you can pull the Galil insert and drop in a different one whenever you move the can to another rifle. It takes a matter of seconds and no special tools beyond what you would normally use on the suppressor.
Does this insert work with suppressors other than the Wolverine?
No, the WV207 is designed specifically for the Dead Air Wolverine PBS-1 mounting system. It will not adapt other suppressors to Galil threads. If you run a different can, look for a mount made for that model's thread or hub pattern.





Reviews
There are no reviews yet.