Description
The Sig Mosquito is a fun little .22 pistol, but its factory metric barrel threads don't play nice with most suppressors made here in the States. Dead Air's DA420 adapter solves that in about ten seconds. It threads onto the Mosquito's factory barrel threads and gives you a standard 1/2×28 right-hand interface on the other end, which is the thread pattern nearly every rimfire can on the market uses. Spin on your Mask HD and you're suppressed.
Why the Mask HD Adapter for Sig Mosquito Earns Its Spot
Dead Air machined these adapters from steel with tight attention to fit and concentricity, which matters a lot more than people think on a rimfire host. A wobbly or off-center adapter is how you end up with baffle strikes, and nobody wants to send their can back for repair over a cheap piece of hardware. This one holds the suppressor true to the bore, and while it was built with the Mask HD in mind, it works just as well with other manufacturers' 1/2×28 rimfire suppressors. The matte black finish blends right in with the Mosquito's slide and most suppressor finishes.
Simple Hardware, Done Right by Dead Air
There's nothing complicated here, and that's the point. It's a small, lightweight piece of steel that does one job and does it correctly. Dead Air makes a whole family of these Mask HD adapters for popular rimfire hosts like the Walther P22, GSG 1911, and FN 5.7, and the Mosquito version follows the same recipe: quality material, correct threads, and a clean finish.
If you picked up a threaded-barrel Mosquito back when they were in production, or grabbed one used, this adapter is the missing link between that pistol and a quiet afternoon of plinking. Keep in mind it fits the factory threaded barrel, so if your Mosquito has the standard non-threaded barrel you'll need a threaded one first. Beyond that, install it, snug it up, and go shoot.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA420
- UPC: 810128161244
- Host Firearm: Sig Sauer Mosquito (factory threaded barrel)
- Output Thread Pitch: 1/2×28 right-hand
- Material: Steel
- Finish: Matte black
- Designed For: Dead Air Mask HD and other 1/2×28 rimfire suppressors
- Product Type: Suppressor thread adapter
- Shipping Weight: 0.02 lbs
What’s Included
- Dead Air Sig Mosquito to 1/2×28 thread adapter (thread protector not included)
Frequently Asked Questions
Will the Dead Air Mask HD Sig Mosquito adapter work with suppressors other than the Mask HD?
Yes. Dead Air designed these adapters for the Mask HD, but they machined them for proper fit and concentricity with other manufacturers' rimfire silencers too. Any rimfire suppressor with a standard 1/2×28 mount should thread right on.
Do I need a threaded barrel on my Mosquito to use this adapter?
You do. This adapter threads onto the factory threaded barrel that Sig offered on the threaded-barrel Mosquito models. If your pistol has the standard non-threaded barrel, you'll need to swap to a threaded barrel before this adapter can do its job.
Does the DA420 adapter come with a thread protector?
No, a thread protector is not included with this adapter. If you plan to carry or store the pistol with the adapter installed and no suppressor attached, it's worth picking up a standard 1/2×28 thread protector to keep the threads clean and undamaged.
Why does concentricity matter on a thread adapter like this?
A .22 suppressor has a fairly tight bore opening, so the can needs to sit perfectly in line with the barrel. An adapter that's machined off-center can cause a baffle strike, which damages your suppressor. Dead Air machines these from steel with concentricity as a priority, which is exactly what you want from this piece of the setup.



Reviews
There are no reviews yet.