$67.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A plain flat front cap gets the job done, but if you run your suppressor in low light you already know how distracting muzzle flash can be at the end of the can. Dead Air's RXD R-Series Flash Hider Front Cap tackles that with a six-tine flash hider built right into the cap itself, breaking up the fireball before it becomes a problem. This version is bored for 9mm and 10mm projectiles, which makes it the natural pick for pistol-caliber cans and large-bore pistol suppressor setups where a .30 cal cap would leave performance on the table.
Dead Air's flash hider front caps are known for cutting visible muzzle flash by a wide margin compared to a standard cap, and the tined design also helps tame first-round pop. That matters more than most people think on a pistol can, where the shorter tube and bigger bore tend to let more flash escape. The RXD683 is machined from 7075 aluminum with a hard coat anodized finish, so it adds an aggressive look and real function without piling extra weight onto the front of your suppressor.
One of the smartest parts of the RXD cap design is the built-in wrench flats. Instead of hunting down a brand-specific spanner, you can install, torque, or pull this cap with a standard 11/16 inch socket or open-end wrench from any hardware store. That makes end-of-day cleaning and cap swaps quick work whether you are at the bench or out in the field.
This cap threads onto Dead Air's R-Series front cap pattern, which covers the Ruger x Dead Air RXD line, including the RXD910Ti where this exact cap comes standard, along with other R-Series front cap threaded suppressors and the PYRO 2.0. If your can wears an R-Series cap and you feed it 9mm or 10mm, this is a simple upgrade that pays off every time the light gets low.
It uses Dead Air's R-Series front cap thread pattern, so it fits the Ruger x Dead Air RXD suppressor line, other R-Series front cap threaded Dead Air cans, and the PYRO 2.0. It comes standard on the RXD910Ti, so this listing is also handy as a spare or replacement. If you are unsure about your can, check Dead Air's accessory fitment guide before ordering.
No, and that is one of its best features. The RXD caps are machined with standard wrench flats, so a common 11/16 inch socket or open-end wrench handles installation, torquing, and removal. No proprietary spanner required.
Yes. The RXD683 is bored to clear projectiles up to 10mm, so 9mm, .38, .357, and similar diameters pass through with room to spare. Just never run anything larger than the rated bore through it.
Dead Air's tined flash hider front caps are designed to cut visible muzzle flash substantially, with the company citing reductions in the 50 to 75 percent range on its R-Series flash hider caps. The design also helps knock down first-round pop. It is one of the easiest performance upgrades you can make to a suppressor.
| UPC | 810128163620 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RXD683 |
| Caliber/Gauge | 10mm |
You must be logged in to post a review.
Reviews
There are no reviews yet.