$10.99
24 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The GunMaster 12 Gauge Shotgun Cleaning Kit from DAC Technologies is one of those grab-and-go sets that just makes routine maintenance easier. It's built specifically for 12-gauge bores and packs every piece into a custom-molded clamshell case with a clear top and a locking TPR closure, so nothing rattles loose in the back of the truck or the corner of your gun safe. At roughly 8.7 inches long, it slides right onto a shelf or into a range bag without taking up much room.
The centerpiece here is the hybrid multi-function handle. It pairs up with a two-piece solid brass cleaning rod for traditional bore work, threads onto a 33-inch pull cord when you'd rather run a patch straight through, and doubles as a screwdriver handle for the included bit set. That last part is handy when you need to pop off a stock or tighten up a loose screw during a cleaning session and don't want to go digging for tools.
Inside you'll find a phosphor bronze bore brush for scrubbing out fouling, a wool mop for spreading solvent and oil, a solid brass jag, and a plastic slotted tip for running patches. DAC includes 25 cleaning patches to get you started, plus a six-piece driver bit set covering two Phillips, two flat heads, one star, and one hex. It's a practical spread of bits that handles most of the fasteners you'll run into on a common pump or semi-auto shotgun.
Whether you're a weekend clay breaker, a duck hunter, or you just want to keep the home-defense 12-gauge in good shape, this kit covers the fundamentals without a lot of extra clutter. Add your own solvent and oil and you've got a complete field-and-bench maintenance setup that lives in one tidy case.
This kit is set up specifically for 12-gauge bores, so it covers most common pump-action and semi-auto shotguns in that gauge. The brush, mop, jag, and slotted tip are all sized for 12-gauge, and the driver bits handle the typical screws you'll find on those guns. If you shoot 20-gauge or .410 as well, you'll want a kit matched to those bores.
The kit includes both a two-piece solid brass rod and a 33-inch pull rod, so you've got options for running patches and brushes through the bore. The pull cord setup is especially handy for longer field and hunting barrels. Keep in mind that very short barrels can be a tight fit for the rigid rod, so many folks use the pull-through for those.
The multi-function handle doubles as a screwdriver, and the six included bits (two Phillips, two flat heads, one star, and one hex) let you handle stock bolts, sight screws, and other common fasteners while you clean. It's a nice touch that saves you from grabbing a separate tool during takedown. The bits store right in the case so everything stays together.
No, this is a tool-and-accessory kit, so cleaning solvent and gun oil are not included. You'll supply your own bore cleaner and lubricant, then use the brush, mop, and patches to apply and remove them. That's pretty standard for compact kits at this size and keeps the case slim.
| UPC | 761903381848 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SG12SG |
| Caliber/Gauge | 12 Gauge |
| Case Material | Clamshell |
| Length | 8.7000 |
| Model | |
| Product Type | Shotgun Kit |
| Shipping Weight | 0.65 |
You must be logged in to post a review.
Reviews
There are no reviews yet.