Description
If you've been wanting to run a red dot on your CZ P-10 C but aren't ready to send the slide off for milling, this EGW mount is the simple way to get there. It replaces the factory rear sight in the dovetail and gives you a solid platform for a Trijicon RMR footprint optic, so you can add a dot and still swap back to irons down the road if you change your mind.
EGW machines this one from 7075 aluminum and finishes it in a matte black hardcoat, which is the kind of build you want sitting on top of a carry or range gun. It measures 1.780 inches long and about 1.1 inches wide, keeping the optic low and tucked in rather than perched up high. The RMR footprint also opens up a lot of popular optic options, since the Holosun 407C, 507C, and other RMR-pattern dots share the same screw pattern.
What the P-10 C RMR Mount Fits
This mount is built for the standard, non-optics-ready CZ P-10 C that uses a dovetail rear sight. It is not meant for P-10 C Optics Ready slides, since those already have a factory optic cut and plate system. If you've got the standard P-10 C and want a dot on it, this is the route a lot of folks take.
Installing the EGW Sight Mount
Installation is straightforward for anyone comfortable with a sight pusher or a brass punch. You drift out the factory rear sight, slide the EGW mount into the dovetail, snug the set screw, and then mount your optic to the included screws with a bit of blue Loctite. A handy trick is placing a small piece of paper between the dot and the mount so it comes apart clean later and keeps Loctite off the optic body. Torque the optic screws to around 15 in/lbs and you're set. One thing worth knowing: because the optic sits on this mount rather than down in a milled pocket, standard-height irons generally won't co-witness, so most people run this as a dot-primary setup or add taller sights if they want backup irons.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49529
- UPC: 841370116447
- Fits: CZ P-10 C (standard, non-optics-ready)
- Optic Footprint: Trijicon RMR / SRO, Holosun 407C / 507C
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized (Type III)
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Mounting Style: Dovetail (replaces rear sight)
- Color: Black
- Country of Origin: United States
What’s Included
- EGW Trijicon RMR sight mount
- (2) 6-32 flat head mounting screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
Does this EGW mount fit the CZ P-10 C Optics Ready model?
No, this mount is designed for the standard CZ P-10 C that uses a dovetail rear sight. The Optics Ready version already has a factory optic cut and uses CZ's mounting plate system, so this mount isn't needed on those. Make sure your slide has a rear sight dovetail before ordering.
What optics will mount to it besides the Trijicon RMR?
The mount uses the Trijicon RMR footprint, which is one of the most common patterns out there. That means RMR-pattern dots like the Trijicon SRO and Holosun 407C and 507C share the same screw pattern and will bolt right up. If your optic lists an RMR footprint, it should work.
Do I need to mill my slide to use this?
Not at all, and that's the whole appeal. You simply drift out the factory rear sight and drop this mount into the dovetail, no machining required. It's also reversible, so you can pull the mount and reinstall a rear sight later if you want.
Will my iron sights co-witness through the red dot?
With standard-height irons, no. Because the optic sits up on the mount rather than down in a milled pocket, the dot rides higher than your factory sights. Most people run this as a dot-primary setup, though taller aftermarket sights can be added if you want backup irons.



Reviews
There are no reviews yet.