$535.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
CZ built a well-earned reputation with the P-10 series, and the P-10 F OR SR is the full-size model dialed up a notch. Introduced to the US market in 2023, it takes everything the P-10 F already got right and layers in factory suppressor and optic readiness without making compromises elsewhere. The 5.1-inch cold hammer-forged barrel is threaded at the industry-standard 1/2×28 pitch and ships with a thread protector cap to keep the muzzle clean between uses. The fiberglass-reinforced polymer frame and nitride-finished steel slide are built to hold up over the long haul, and the grip texturing gives you real purchase without being uncomfortable during long range sessions.
The optic-ready slide uses CZ's proprietary mounting interface, and separate adapter plates are available to fit most popular mini red dots including options from Holosun, Trijicon, Leupold, and Vortex. The slide ships with a filler plate installed, so you are not staring at an open hole until you are ready to mount glass. The suppressor-height three-dot luminescent iron sights co-witness with a mounted optic, so you always have a backup aiming solution. The trigger on the P-10 platform consistently draws attention from reviewers and range-goers alike. It breaks cleanly at around 4.5 pounds, resets short, and feels more refined than what you typically find on a factory striker-fired pistol in this price range.
The P-10 F OR SR ships with three interchangeable backstraps so you can fine-tune the fit to your hand. The deep grip contour and pronounced tang push your hand high on the grip for a naturally low bore axis, which helps manage felt recoil noticeably well. Both the slide stop and magazine release are ambidextrous, making this a genuinely left-hand-friendly pistol right out of the box. An integrated Picatinny rail on the frame handles lights and lasers without any adapter needed. Safety-wise, the design runs a firing pin block, trigger bar safety, and blade trigger safety, giving you three passive layers without an external manual safety to fumble with.
With 21+1 capacity and two magazines in the box, this is a pistol that works as a home defense gun, a range workhorse, a suppressor host, or a solid competition starting point depending on what you are trying to do with it.
Yes, a separate mounting plate is required to attach a red dot sight. The slide ships with a filler plate installed, and CZ-USA as well as third-party suppliers like C&H Precision offer plates compatible with most popular mini red dot footprints including Trijicon RMR, Holosun, Leupold, and Vortex. The mounting plate system is a cost-effective alternative to paying for a custom milling job.
Yes, the P-10 F OR SR's factory recoil spring is designed to cycle reliably with a suppressor mounted. CZ engineered these OR SR models specifically with suppressed use in mind, and reliability has been reported as solid across a range of ammunition weights both suppressed and unsuppressed.
The trigger breaks at approximately 4.5 pounds with a relatively clean break and short reset, which puts it a step above most factory striker-fired triggers in this category. It has some take-up before the break, similar to other pistols in the segment, but the reset is short enough for quick follow-up shots and the overall feel draws consistent praise from reviewers and range users.
It is well set up for left-handed use. Both the slide stop and magazine release are ambidextrous, and the mag catch can be swapped to accommodate southpaws. Those features are included from the factory with no modifications needed.
The slide is cut using CZ's proprietary interface, and mounting plates are available for most popular micro red dot sights from Holosun, Trijicon, Leupold, Vortex, and others. You select the plate that matches your specific optic footprint, bolt it on, and you are ready to go. CZ-USA sells plates directly, and they are also widely available from aftermarket suppliers.
The OR SR version adds the 5.1-inch threaded barrel with a 1/2×28 muzzle thread, a slide pre-cut for optic mounting, and suppressor-height iron sights that co-witness with a mounted red dot. The standard P-10 F uses a shorter unthreaded barrel and standard-height sights. Everything else about the platform, including the frame, trigger, ergonomics, and controls, remains the same between the two.
| UPC | 806703915562 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 91556 |
| Action | |
| ATF Type | Pistol |
| Barrel Finish | Black |
| Barrel Length | 5.1" |
| Caliber/Gauge | 9mm |
| Capacity | 21 + 1 |
| Color | Black |
| Length | 11.5 |
| Magazine Included | 2 x 21-Round |
| Model | |
| Number of Magazines | 2 21 rd. |
| Package Height | 2.7 |
| Package Width | 8.3 |
| Product Type | Semi-Auto Pistol |
| Safety | Tactical |
| Shipping Weight | 3.5 |
| Sights | 3-Dot Suppressor Height |
| Sights Type | Fixed Sights |
| Slide Description | Optic Ready/Serrated |
| State Restriction (IL) | NO SALE TO ILLINOIS PICA |
| State Restriction (OR) | NO SALE TO OREGON |
| State Restriction (RI) | NO DIRECT SHIP TO RHODE ISLAND |
| State Restriction (WA) | NO DIRECT SHIP TO WASHINGTON |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.