Description
EGW built this 20 MOA Picatinny base for one reason: to get more range out of your CZ 457. The 11mm dovetail that comes stock on the 457 works fine for plinking distances, but once you start reaching past 150 yards you run out of elevation in a hurry. This one-piece rail solves that with a built-in forward cant, and it clamps directly to the factory dovetail so there is no drilling or tapping involved.
What the 20 MOA Cant Does for Your CZ 457
The built-in 20 MOA slope tips the whole rail forward, which hands your scope back a big chunk of internal elevation travel. That matters a lot in rimfire, where .22 LR drops fast once you stretch the distance. EGW suggests the 20 MOA version for roughly 150 to 300 yard shooting, and recommends zeroing at 200 yards to make the most of the extra adjustment. If you shoot NRL22 or just like ringing steel out past where most .22 setups give up, this is the base that keeps you dialing instead of bottoming out your turret.
Build Quality on the EGW CZ 457 Rail
These are machined from solid 7075-T6 aircraft-grade aluminum and finished with a Type III matte black hardcoat anodize, so they hold up to real use and keep a low-glare look. The Picatinny cross slots are cut to MIL-STD-1913 spec with tight tolerances and run the full length of the rail, giving you plenty of room to position rings wherever your scope and eye relief need them. Four clamping screws spread the hold across the entire dovetail for a rock-solid connection. The whole thing, right down to the hardware and packaging, is made in the USA.
Mounting the CZ 457 Picatinny Base
Installation is straightforward. It fits any CZ 457 with the 11mm dovetail receiver and works with standard Picatinny or Weaver rings. EGW includes the #6-32 mounting screws and a bit, and recommends a drop of blue Loctite with the screws torqued to spec for a connection that stays put shot after shot.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 80932
- UPC: 841370112128
- Model Fit: CZ 457 (11mm dovetail receiver)
- Elevation/Cant: 20 MOA
- Style: One-piece Picatinny base
- Material: 7075-T6 aircraft-grade aluminum
- Finish: Matte black Type III hardcoat anodize
- Overall Length: 6.276 in
- Height: 0.540 in (top of receiver to top of rail)
- Weight: 4.6 oz
- Ring Compatibility: MIL-STD-1913 Picatinny or Weaver rings
- Color: Black
- Origin: Made in the USA
What’s Included
- EGW 20 MOA one-piece Picatinny base
- #6-32 x 3/4 socket head cap mounting screws
- Install bit
Frequently Asked Questions
Will this EGW base fit any CZ 457?
Yes, it is designed for the CZ 457 with the standard 11mm dovetail receiver, and EGW lists it as fitting all 457 models. It clamps to the factory dovetail, so there is no drilling or tapping needed. Keep in mind it is model-specific and not made for the older 455 or 452 receivers.
What rings do I need for the CZ 457 Picatinny base?
This is a Picatinny-style rail cut to MIL-STD-1913 spec, so it works with any standard Picatinny or Weaver scope rings. Rings are not included, so pick a set in the height your scope objective calls for. The full-length cross slots give you lots of flexibility to position the rings for proper eye relief.
Why would I choose the 20 MOA version over the 0 MOA?
The 20 MOA cant tilts the rail forward and gives your scope more usable elevation for reaching distant targets. EGW recommends the 20 MOA base for roughly 150 to 300 yard shooting and suggests zeroing at 200 yards. If you shoot shorter distances most of the time, the 0 MOA version may suit you better, but for long-range rimfire and NRL22 this is the one to grab.
How should I install the EGW CZ 457 rail?
Set the base on the 11mm dovetail, add a drop of blue Loctite to the included #6-32 screws, and torque them to spec. The four clamping screws spread the hold across the full length of the dovetail for a secure fit. The mounting hardware and bit come in the box, so you have what you need to get it on.





Reviews
There are no reviews yet.