Description
Mounting a reliable optic on a muzzleloader comes down to one thing: a base that won't shift under heavy recoil. The EGW CVA V2 Muzzleloader Picatinny Rail delivers exactly that. Machined from a solid piece of domestic 6061 T6 aluminum, this one-piece base gives your rifle a continuous, rigid foundation that holds zero shot after shot. It carries a 0 MOA elevation, so your scope stays neutral and true for standard hunting distances without any built-in cant to work around.
What the CVA V2 Picatinny Rail Fits
This is the .787" hole spacing version (MPN 46603), built for post-2010 CVA models including the Accura V2, Optima, and Wolf, along with the Bergara B13. Before you order, it's smart to measure the distance between the 2nd and 3rd mounting holes on your receiver and confirm it lands at .787". Getting that spacing right is the difference between a perfect bolt-up and a base that doesn't line up.
Built for the Field, Built to Last
The Picatinny cross slots run the full length of the rail, giving you plenty of room to position your scope rings and get the eye relief dialed in. A machined channel down the center trims the weight to roughly 2 ounces, so you're adding a serious mounting platform without bulking up your rig. After machining, each rail gets tumbled, sandblasted, and Type II anodized in a matte black finish that shrugs off the weather and holds up through hard use. In many setups, the low 0.4" height even leaves your factory iron sights usable.
Topping It Off
The base accepts any standard Picatinny or Weaver rings, so you've got your pick of optics. Mounting hardware is included, with #8-40 screws and a T-10 bit in the box. EGW recommends torquing to 20 in/lbs with a drop of blue thread locker for a setup that stays put. From the rail to the screws to the packaging, the whole thing is made in the USA.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 46603
- UPC: 841370116041
- Model: B13
- Rail Type: One Piece Picatinny
- Elevation: 0 MOA
- Material: Domestic 6061 T6 Aluminum
- Finish: Matte Black Type II Anodized
- Color: Matte Black
- Center Spread (2nd to 3rd hole): .787"
- Overall Length: 5.488"
- Height: .4" (top of receiver to top of rail)
- Weight: Approx. 2 oz
- Torque Spec: 20 in/lbs
- Ambidextrous: Yes
- Country of Origin: USA
What’s Included
- CVA V2 Muzzleloader Picatinny rail base (1-piece)
- #8-40 x 1/4" mounting screws
- T-10 bit
Frequently Asked Questions
What rifles does the EGW CVA V2 Picatinny Rail fit?
This base (MPN 46603) is built for post-2010 CVA models with .787" hole spacing, including the Accura V2, Optima, and Wolf, as well as the Bergara B13. The surest way to confirm fit is to measure the distance between the 2nd and 3rd mounting holes on your receiver and verify it matches .787". If your spacing measures 2.361" instead, you'll want the other EGW CVA mount.
Does this CVA V2 rail have any built-in elevation?
No, this is a 0 MOA base, meaning it sits level with no added cant. That's the right choice for standard muzzleloader hunting ranges where you don't need extra elevation built into the mount. If you were pushing extreme long range you might look at a canted option, but for most CVA setups 0 MOA is exactly what you want.
Will I need separate scope rings for this base?
Yes. This is a Picatinny-style base, and it accepts any standard Picatinny or Weaver rings, which are sold separately. The full-length cross slots give you a lot of flexibility to position your rings and set up proper eye relief for your optic.
Can I still use my factory iron sights with the CVA V2 rail installed?
In many cases, yes. The rail sits at a low .4" height and features a channel down the center, which often leaves the factory iron sights usable. It can vary by rifle and sight configuration, so it's worth a quick check on your specific setup.




Reviews
There are no reviews yet.