$10.99
29 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Cleaning your muzzleloader is only half the job. Once the fouling is gone and the bore is dry, bare metal starts working against you, and moisture, humidity, and even fingerprints can leave you with rust or pitting before the next hunt rolls around. That's exactly what these CVA Barrel Blaster Rust Prevent Patches are built to stop. Each cotton patch comes pre-saturated with a rust-preventative solvent, so you just run one down a clean bore and let it lay down a protective film that shields the steel while your rifle sits in storage.
Think of these as the last thing you do after scrubbing. You clean with solvent, follow up with dry patches until they come out clean, then send one of these pre-lubed patches down the bore. That final pass is what guards against oxidation and corrosion between uses. It's a step a lot of experienced muzzleloader folks swear by, and it takes all of thirty seconds. They're designed around .45 to .54 caliber muzzleloaders, so this .50 cal pack sits right in the sweet spot for the most common rigs out there.
The patches ship 100 to a resealable plastic jar, which is one of those small touches that makes a real difference. The lid keeps them from drying out, so the last patch works as well as the first, and the jar tucks neatly into a range bag or sits on the shelf next to the rest of your cleaning gear. No measuring, no pouring oil, no mess. Twist the lid, pull a patch, and go.
Barrel Blaster is CVA's line of solvents and rust preventatives formulated specifically for black powder firearms, and these patches round out that system nicely. Whether you're putting a rifle away for the off-season or just wiping down after a wet hunt, they make protecting your bore about as simple as it gets. Toss a jar in with your kit and you'll always have the right patch on hand when you finish up.
These are meant to be the final step after cleaning. Once you've scrubbed the bore with solvent and run dry patches through until they come out clean, send one of these pre-lubed patches down the barrel. It lays down a protective film that guards the steel against rust and corrosion during storage.
This pack is sized for .50 caliber muzzleloaders, but the Barrel Blaster Rust Prevent Patches line is designed to work across .45 to .54 caliber rigs. The .50 sits right in the middle of that range, which covers most common muzzleloaders out there.
Yes. Any rust-preventative film left in the bore should be swabbed out with a clean patch before you load and fire, since you want a clean, dry bore for consistent ignition and accuracy. Popping a cap or two on a percussion rifle also helps clear the flash channel before your first shot.
Each jar holds 100 pre-saturated cotton patches. The resealable lid is there to keep them from drying out, so as long as you close it back up after grabbing one, the patches stay ready to use down to the last one.
| UPC | 043125116898 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AC1689 |
| Caliber/Gauge | .50 Caliber (.510) |
| Product Type | BB Rust Prevent Patches |
| Quantity | 1 |
| Shipping Weight | 0.25 |
You must be logged in to post a review.
Reviews
There are no reviews yet.