Description
The cutter shaft is the heart of a Forster Original Case Trimmer, so when yours wears out or you just want a backup on the bench, this is the exact factory part to grab. It's the standard .490" diameter shaft that ships with the Original Case Trimmer, machined from high-alloy steel to hold up to years of regular trimming without losing its edge or its precision.
Four staggered-tooth cutting edges do the real work here, shearing brass cleanly for fast, chatter-free trimming and perfectly square case mouths. Cuts come out bright and uniform, which is exactly what you want before you chamfer and deburr. The shaft also carries all the rotating case conditioning accessories, so it's the piece that ties your whole trimming and prep setup together.
Where the Original Cutter Shaft Fits
This shaft is built for the Original Case Trimmer only and covers standard calibers with case mouths from .204" through .459", roughly 5.7×28 all the way up to .45-70. It will not fit the Classic trimmer, which uses a larger .552" shaft, and it is not the dedicated 17 caliber version. If you're trimming .17 cal brass, you'll want the separate 17 caliber cutter shaft instead.
Keeping Your Forster Cutter Shaft Running Smooth
Forster builds these to last. It's not uncommon for reloaders to run the same shaft through many thousands of case trims before ever needing a replacement. A drop of light oil on the shaft now and then keeps everything turning smooth. The package includes an O-ring and an 8-32 x 1/8" set screw for locking pilots and case trimmer tools in place, so you've got the small bits needed to drop it straight into service.
If you already run a Forster Original and want the peace of mind of a spare part ready to go, this is a smart, inexpensive thing to keep in the drawer.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: CT1010-CTC400
- UPC: 757253003950
- Fits: Original Case Trimmer (CT1010) only
- Shaft Diameter: .490"
- Caliber Range: .204" to .459" case mouths
- Cutting Edges: Four staggered-tooth
- Material: High-alloy steel
- Type: Replacement cutter shaft
- Shipping Weight: 0.22 lb
What’s Included
- Original Case Trimmer cutter shaft (.490" diameter)
- O-ring
- 8-32 x 1/8" set screw for locking pilots and trimmer tools
Frequently Asked Questions
Will this cutter shaft fit the Forster Classic Case Trimmer?
No. This is the standard .490" shaft made specifically for the Original Case Trimmer. The Classic trimmer uses a larger .552" diameter cutter shaft, which is a separate part.
Does this cutter shaft work for trimming .17 caliber brass?
No, this is the standard shaft for case mouths from .204" to .459". Trimming .17 caliber brass requires the dedicated 17 caliber cutter shaft, which is a different part and UPC. For everything from roughly 5.7×28 up to .45-70, this standard shaft is the one you want.
What caliber range does the Forster Original cutter shaft cover?
It handles standard calibers with case mouths from .204" through .459". That covers most common reloading rounds, from small bottleneck cartridges all the way up to .45-70. It's the same shaft that comes installed in a new Original Case Trimmer.
How do I keep the cutter shaft cutting cleanly?
A drop of light oil on the shaft every so often keeps it turning smoothly during trimming. The four staggered-tooth edges are built to resist chatter, and the high-alloy steel holds up to heavy use. Many reloaders go through thousands of trims before a shaft ever needs replacing.




Reviews
There are no reviews yet.