$283.95
15 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Crimson Trace CMR-301 Rail Master Pro solves a problem most of us have wrestled with at some point: fitting both a light and a laser on a rifle without running out of rail. Instead of bolting on two units that fight over real estate and pile on weight, you get a forged aluminum body that carries a bright green laser and a white light side by side, all in one flat, low-profile package that stays out of the way of your other accessories.
The white light peaks at 1000 lumens and steps down to 500 and 150-lumen settings, which comes in handy when you want to stretch runtime or keep the beam from washing out the laser dot at close range. The 532nm green laser is the star here. Green shows up far better to the human eye than red, especially in daylight where a red dot tends to vanish, and this one stays visible at typical rifle distances. It adjusts for windage and elevation, so dialing in a clean zero is straightforward.
A mode selection dial on the back lets you pick light only, laser only, or both together, and the icons glow in the dark so you can find the right setting when the lights are out. There's a button right on the housing for direct operation, and when you plug in the included 6-inch remote pressure pad, that rear button locks out so the two switches never conflict. That gives you one clean point of control wherever you decide to place the pad on your handguard.
The unit ships with both Picatinny (M1913) and M-LOK adapters plus the mounting hardware, so it drops onto most modern rifles, carbines, and shotguns with at least 2.75 inches of open rail. Power comes from a single rechargeable lithium battery that charges through the included USB-C cable right at the unit, meaning there's no separate charger to misplace and no need to dismount it to top off. Plan on roughly an hour of continuous run time, which goes a lot further with the momentary use most people rely on. The IPX7 waterproof rating and forged aluminum housing mean rain and rough handling in the field aren't going to slow it down.
Yes. It ships with both a Picatinny (M1913) adapter and an M-LOK adapter along with the mounting hardware, so it works on most rifles, carbines, and shotguns. You just need at least 2.75 inches of open rail to mount it.
Plan on roughly an hour of continuous run time with both the laser and light going, which stretches much further with momentary use since you rarely run everything full-time. It uses a single rechargeable lithium battery that charges through the included USB-C cable right at the unit, so there's no separate charger to lose. You don't even have to dismount it to top off the charge.
Green lasers show up far better to the human eye than red, especially in daylight where a red dot can be tough to see. The 532nm green laser on the CMR-301 stays visible at typical rifle distances, and it adjusts for windage and elevation so you can lock in a solid zero.
A mode selection dial on the back of the unit lets you choose light only, laser only, or both together, and the icons glow in the dark for quick changes in low light. There's a button on the housing for direct control, and when you plug in the remote pressure pad, that rear button locks out so the two switches don't conflict.
| UPC | 610242010110 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 01-00020 |
| Color | Black |
| Dot Size | 0.50" at 50 Ft |
| Length | 8 |
| Model | |
| Mount Type | Picatinny Rail |
| Package Height | 3.0 |
| Package Width | 6.0 |
| Product Type | Accessory-Lasers and Sights |
| Shipping Weight | 0.85 |
| State Restriction (Guam) | NO SALE TO GUAM |
| State Restriction (PR) | NO SALE TO PUERTO RICO |
You must be logged in to post a review.
Reviews
There are no reviews yet.