Description
If you shoot a break-barrel, Nitro Piston, or PCP air rifle, this is the little tube you want in your maintenance kit. Crosman RMCOIL is a silicone-based chamber oil built to handle the higher pressures those powerplants generate, which is exactly why it works where a standard CO2 oil won't. It conditions the piston seals, reduces wear on the moving internals, and helps your rifle hold steady velocity over the long haul. The .25 oz squeeze tube makes it easy to place a drop right where you need it.
Why RMCOIL Beats Pellgun Oil for Spring and Nitro Piston Rifles
This is the part folks trip up on most. Pellgun oil is a petroleum-based product meant for CO2 and pump pneumatic guns, and it can cause real trouble in a spring or gas-piston powerplant where combustion-like heat builds up during the shot cycle. RMCOIL is silicone based, so it stands up to that heat and pressure without breaking down or risking a detonation inside the chamber. If you own a Nitro Piston, Nitro Piston 2, or a springer, this is the oil the job calls for.
Getting the Most Out of Your Silicone Chamber Oil
Less is more here. A single drop dropped into the chamber or on the piston seal, worked in per your owner's manual, is usually all it takes to keep things lubricated and moving right. Many owners run a drop every tin of pellets or so as part of a regular routine, and some notice their gun cycling a touch smoother afterward. The silicone formula also resists moisture and humidity, so it helps fend off internal wear if your rifle sees damp field conditions or gets stored in a garage.
Crosman has been building airguns and the gear to keep them running for over a century, and this chamber oil is genuine factory-recommended stuff for their break-barrel and PCP lineup. It's a small, inexpensive part of ownership that pays off in seal life and consistency down the range. Always check your manual before oiling so you're putting it in the right spot.
Key Specifications
- Manufacturer: Crosman
- Manufacturer Part Number: RMCOIL
- UPC: 028478124363
- Product Type: Air Gun Oil
- Lubricant Base: Silicone
- Size: .25 oz
- Container: Squeeze Tube
- Compatible Powerplants: Spring, Nitro Piston, Nitro Piston 2, PCP, Break-Barrel
- Primary Use: Chamber and piston seal lubrication
- Not Recommended For: CO2 or pump pneumatic guns (use Pellgun Oil instead)
What’s Included
- One .25 oz squeeze tube of Crosman RMCOIL Silicone Chamber Oil
Frequently Asked Questions
Can I use RMCOIL Silicone Chamber Oil on my CO2 airgun?
No, this silicone chamber oil is formulated for spring, Nitro Piston, and PCP airguns, not CO2 guns. For CO2 and pump pneumatic guns, you want Crosman Pellgun Oil instead. Using the wrong oil in the wrong powerplant can lead to seal damage or performance loss.
How much RMCOIL should I apply and how often?
A little goes a long way with this stuff. A single drop placed in the chamber or on the piston seal per your owner's manual is generally all you need. Many owners apply a drop roughly every tin of pellets as part of routine maintenance, but always check your rifle's manual for the correct spot and interval.
Will this silicone chamber oil work on non-Crosman air rifles?
Yes, it's a silicone-based oil suited to spring/piston, gas ram, and PCP airguns from various brands, though it's officially recommended for Crosman break-barrel and PCP models. Just confirm your rifle uses one of those powerplants and follow the manufacturer's oiling instructions. If you're unsure what powerplant you have, the owner's manual will tell you.
Why can't I just use regular gun oil in my spring airgun?
Standard petroleum-based gun oils and Pellgun oil aren't built for the heat and pressure a spring or Nitro Piston chamber creates during the shot cycle. That can cause the oil to break down or even detonate inside the chamber. RMCOIL's silicone base is engineered specifically to handle those conditions safely.




Reviews
There are no reviews yet.