KIDD Complete Bolt for Ruger 10/22 LR – Silver Matte

Description

The KIDD Complete Bolt is one of the cleanest ways to get more consistency out of your Ruger 10/22 without touching the rest of the rifle. KIDD builds these from stainless steel and machines them so the headspace and firing pin protrusion are dialed in from the factory, which is the part most stock bolts get a little loose on. Correct headspace lets rounds seat and feed the way they should, while the tuned firing pin protrusion keeps rim contact right where it needs to be for reliable ignition instead of the light or hit-or-miss strikes people sometimes fight with a worn factory bolt.

What the Silver Matte KIDD Bolt Brings to the Range

The rear of the bolt is radiused and hand polished, which cuts drag as it rides over the hammer and gives you that noticeably smoother cycle feel folks talk about after the swap. The firing pin is pinned rather than free floating, and that detail alone tends to tame first shot flyers and keep ignition consistent from the cold bore shot onward. The matte version tips the scales right around 6.5 ounces, and the finish KIDD uses was originally developed to coat racing engines, so it holds up to constant cycling instead of wearing thin over time.

Fitting the KIDD 10/22 Complete Bolt

This is a true drop-in for any factory 10/22 style receiver as well as KIDD's own .22LR receivers, no gunsmithing or modification needed. There is no headspace to set since it is already built in, and the barrel shoulder against the receiver face is your reference point. Worth noting up front: the assembly includes the bolt, firing pin, and extractor, but not the guide rod, spring, or charging handle. Your existing recoil assembly carries over just fine, though plenty of builders pair this with a KIDD charging handle and spring kit while they have the action apart. If you are chasing tighter groups and more dependable feeding out of a 10/22 or a custom build, this is a solid, well made foundation to start from.