Description
The Redding Competition Carbide Size Button Kit in .270 Winchester is the upgrade that lets you run a size button inside the Competition Bushing Neck Sizer Die. If you load a bushing die but still want an expander working the inside of the neck, this kit gives you the best of both worlds. The carbide button sizes the case neck from the inside while the bushing handles the outside, so you dial in neck tension the way you want it.
The real draw here is how smooth the carbide runs. Standard steel expander balls usually need a touch of case lube or they drag and stretch necks. This button glides through dry, no lubrication required, which keeps your bench cleaner and cuts a step out of the process. The button is free floating on the decapping rod, meaning it self-centers in the case mouth as it passes through. That self-alignment is what keeps runout down and helps your loaded rounds come out straight and consistent.
What the .270 Win Carbide Button Kit Does on Your Bench
Reloaders who have switched to carbide expanders tend to notice the sizing stroke gets noticeably easier, with less force needed to work the press handle. For a cartridge like the .270 Winchester that sees a lot of neck working between firings, that smoother pass helps extend brass life and keeps things repeatable load after load. It is a popular addition for precision shooters who prep their brass carefully and want tight, uniform neck tension.
Fitting the Redding Carbide Size Button Kit to Your Die
This kit is made to work with Redding Competition Bushing Neck Sizer dies in .270 Winchester. It is a component upgrade, not a standalone die, so you will need the corresponding Redding die to use it. Installation is straightforward: the button rides on the decap rod and is held in place by the included retainer. Made in the USA, it carries the same build quality Redding is known for across their reloading line.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 99427
- UPC: 611760994272
- Caliber: .270 Winchester / 6.8mm (.277)
- Bullet Diameter: 0.277 in
- Type: Carbide Size Button Kit for Competition Bushing Neck Die
- Button Material: Carbide
- Design: Free-floating, self-centering on decapping rod
- Country of Manufacture: United States
What’s Included
- Carbide size button (.270 / .277)
- Retainer
- Spare decapping pin
Frequently Asked Questions
What die does the Redding carbide size button kit fit?
This kit is designed for the Redding Competition Bushing Neck Sizer Die in .270 Winchester. It lets you add a size button to that die when you want an inside expander working alongside the bushing. Keep in mind it is a component upgrade, so you will need the matching Redding die to use it.
Do I still need to lube the inside of the case necks with this carbide button?
No, that is the main benefit. The carbide finish lets the button glide through the neck dry, so you can skip lubing the inside of the necks. Some reloaders still add a touch of graphite or mica on virgin brass when truing up case mouths, but for most sizing it runs clean without lube.
How does the carbide button improve consistency?
The button is free floating on the decapping rod, so it self-centers in the case neck as the case is drawn back out of the die. That self-alignment helps minimize runout and produces straighter, more uniform loaded rounds. It also makes the sizing stroke smoother with less effort on the press handle.
Is this a complete die or just the button kit?
This is the button upgrade kit only, not a standalone die. It includes the carbide size button, a retainer, and a spare decapping pin. You install these parts onto the decap rod of your existing Redding Competition Bushing Neck die.




Reviews
There are no reviews yet.