Description
If you run Redding Competition bushing dies in a .22 bore, this carbide size button kit is one of the simplest upgrades you can make to your reloading bench. It replaces the standard expander on your decapping rod with a hard carbide button that slips through the inside of the case neck far more smoothly than steel, which means cleaner, more consistent neck sizing and a lot less effort on the downstroke. The button is free floating on the rod so it self-centers inside the neck, helping keep runout in check on your .22 caliber brass.
What the Carbide Size Button Kit Does Differently
The big draw here is skipping the lube step. A standard expander ball usually needs some case neck lubrication to avoid grabbing and stretching brass, but the slick carbide surface lets you size most fired cases dry. That saves a real amount of case prep time over a loading session, and you spend less effort cleaning lube residue off finished rounds. Virgin brass or cases you're truing up may still like a touch of graphite or mica, but for routine reloading it runs clean.
Fitment for Your .22 Caliber Competition Dies
This is the Competition style kit (MPN 98123), covering the .22 caliber family that includes 222 Remington, 223 Remington / 5.56, and 22-250 Remington. It's made specifically for Redding Competition bushing dies. Standard dies and standard Type-S dies use a different kit, so match it to the Competition die you're running before you order. Redding has been building precision reloading gear in the USA since 1946, and this little kit carries that same attention to tolerances.
Inside the Redding Carbide Button Kit
Everything you need to make the switch is in the package. You get the carbide size button, the retainer that holds it on the rod, and a spare decapping pin so you're covered if one gets bent along the way. Installation is straightforward and the result is a noticeably smoother neck sizing feel that's hard to go back from once you've tried it.
Key Specifications
- Manufacturer: Redding Reloading
- Manufacturer Part Number: 98123
- UPC: 611760981234
- Caliber: .22 Caliber (.224)
- Cartridges Covered: 222 Rem, 223 Rem / 5.56, 22-250 Rem
- Type: Competition Bushing Die Carbide Size Button Kit
- Die Compatibility: Redding Competition style dies
- Button Design: Free floating, self-centering carbide
- Country of Origin: United States
What’s Included
- Carbide size button
- Retainer
- Spare decapping pin
Frequently Asked Questions
Which Redding dies does this carbide size button kit work with?
This kit (98123) is made for Redding Competition style bushing dies in .22 caliber. Standard dies and standard Type-S dies use a different carbide button kit, so check which die you own before ordering. It covers the .22 caliber family including 222 Remington, 223 Remington, and 22-250 Remington.
Do I still need case neck lube with the carbide button?
For most fired cases you can size dry, since the carbide surface glides through the neck without grabbing the way a steel expander can. Virgin brass or cases where you're truing up the mouth sometimes benefit from a little graphite or mica. For routine reloading, many people run it with no lube at all.
How does the carbide button help accuracy?
The button floats freely on the decapping rod, so it self-centers as it passes through the case neck. That helps produce more uniform neck tension and keeps runout down, both of which matter when you're chasing tight groups. The smoother action also reduces the chance of stretching or distorting the neck.
Is this a complete die set or just an upgrade part?
This is an upgrade kit, not a full die set. It swaps the standard expander on your existing Redding Competition bushing die for a carbide button. You'll need the matching Competition die already on your bench to use it.



Reviews
There are no reviews yet.