Redding Competition Bushing Neck Die 243 Win – MPN 56114

Description

The Redding Competition Bushing Neck Die for 243 Winchester is built for the handloader who treats consistency like a religion. It uses the same sliding-sleeve concept as Redding's Competition Seating Die, where the case is fully supported and aligned with the sizing bushing before any sizing begins. As the case moves up, it stays captured in a tightly chambered sliding sleeve while the resizing bushing self-centers on the neck. That design is where the concentricity gains come from, and it's why reloaders chasing tight groups keep reaching for these dies.

How the 243 Win Competition Bushing Neck Die Works

Because this is a bushing die, you pick the exact bushing diameter for the neck tension you want, which means you size the neck just enough to hold the bullet without overworking the brass. That translates to longer case life and more uniform tension from piece to piece. The micrometer head on top lets you dial in precisely how much of the neck length gets sized, and the markings let you return to a favorite setting whenever you switch brass or loads. The decapping rod rides in precise alignment using the die's internal parts as a linear guide, much like a firing pin.

What You Get With the Redding 243 Competition Neck Die

This listing is for the single Competition Bushing Neck Sizing Die, not the full three-die set. It ships without bushings, so you'll want to measure a loaded round's neck diameter and order the right bushing in .001 inch increments to match your brass and desired tension. Shellholders are also sold separately. The die uses a standard 7/8-14 thread and drops into any common single-stage press.

Why Precision Shooters Reach for This Neck Die

If you're loading 243 Win for benchrest, varmint work, or just squeezing every bit of accuracy out of your rifle, neck sizing with a bushing die is one of the cleaner ways to get there. It keeps runout low, treats your brass gently, and gives you repeatable control that standard expander-ball dies simply can't match. Made in the USA with the fit and finish Redding has been known for across the reloading world.