0
0

EGW Trijicon RMR Mount for Colt Gold Cup, Python & Anaconda

UPC: 841370116515

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This EGW mount solves one of the trickier problems in the Colt world: getting a modern red dot onto a revolver or 1911 that wears the Elliason style adjustable rear sight. Instead of sending your slide out for milling, the mount drops right into the rear sight dovetail and gives you a solid platform for a Trijicon RMR or SRO, along with a wide range of compatible optics sharing that footprint.

What the Gold Cup RMR Mount Fits

It's cut for guns running the Elliason style adjustable rear sight, which covers the Colt Gold Cup, Trooper Mark 3, and pre-2020 Python and Anaconda models. On the optic side, it carries the Trijicon RMR and SRO plus the Holosun 407C, 507C and 508T, and several Swampfox sights that share the same mounting pattern. It does not work with optic-ready factory models or the compact RMRcc. If you're running a 2020 or newer Python or Anaconda, this isn't the version you want.

Machined From 7075 With a Hardcoat Finish

The body is CNC'd from 7075 aluminum and wears a matte black hardcoat, so it holds up to recoil and handling without looking out of place against a blued Colt. It measures 1.780 inches long and 1.1 inches wide, keeping the optic low and tight to the slide. The dovetail runs a progressive taper to make seating easier, and a set screw locks it down once it's in place.

Installation and Hardware

Setup is refreshingly simple. You pull the factory rear sight, seat the mount in the dovetail, snug the set screw, then torque the optic screws to 15 in/lbs with a drip of blue Loctite. On Gold Cup, Python and Trooper models the original elevation screw gets reused in the mount's center hole; the Anaconda is the exception there. Everything needed comes packaged, and when you want irons back, the mount comes off and your rear sight goes right back in. A rear sight pusher makes the job easier, and plenty of owners report no filing needed to get a clean fit.

Key Specifications

  • Manufacturer: Evolution Gun Works (EGW)
  • Manufacturer Part Number: 49522
  • UPC: 841370116515
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat
  • Overall Length: 1.780 in
  • Overall Width: 1.1 in
  • Optic Fitment: Trijicon RMR / SRO, Holosun 407C / 507C / 508T, Swampfox
  • Fits Firearms: Colt Gold Cup, Trooper Mark 3, Python & Anaconda (pre-2020, Elliason rear sight)
  • Number of Bases: 1-Piece
  • Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 x 3/16 Set Screw
  • Torque Spec: 15 in/lbs
  • Color: Black
  • Made In: USA

What’s Included

  • EGW Trijicon RMR sight mount (1)
  • 6-32 flat head screws (2)
  • 6-32 x 3/16 set screw (1)

Frequently Asked Questions

Does this mount require milling or machining my Colt slide?

No. It drops into the existing rear sight dovetail in place of your Elliason style rear sight, so there's no need to send the slide out for milling. Many owners report a clean fit with no filing, and the whole thing reverses back to your factory sight whenever you want.

Which Colt models does the EGW 49522 fit?

It's made for Colts running the Elliason style adjustable rear sight, including the Gold Cup, Trooper Mark 3, and pre-2020 Python and Anaconda. It does not fit 2020 and newer Python or Anaconda revolvers, and it won't work with factory optic-ready models.

What red dot sights will mount on it?

The mount carries the Trijicon RMR footprint, which covers the RMR and SRO as well as the Holosun 407C, 507C and 508T, plus several Swampfox models sharing that pattern. It does not fit the compact Trijicon RMRcc.

Do I reuse my factory elevation screw to install it?

On the Gold Cup, Python and Trooper Mark 3, yes, the original elevation screw from your rear sight gets reused in the center hole of the mount. The Anaconda is the exception and needs a separate screw. All the optic mounting hardware you need comes in the box.

Additional information

UPC

841370116515

Manufacturer

Manufacturer Part Number

49522

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Trijicon RMR Mount for Colt Gold Cup, Python & Anaconda”