0
0

Forster .338 Caliber Bullet Puller Collet #338 (BP2338)

UPC: 757253003066

$16.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Every reloader eventually runs into a batch that needs to come apart, whether you fat-fingered a powder charge, want to swap bullets, or just need to salvage components. The Forster .338 Caliber Bullet Puller Collet #338 is the piece that makes that job clean. Machined from solid steel and heat treated, this collet grabs a .338 diameter bullet from the inside and holds tight while the press does the pulling. No mallet, no beating on your bench, and far less chance of deforming the bullet you're trying to save.

How the #338 Collet Fits Into Your Setup

This is a replacement or add-on collet, not a complete puller, so you'll need a Forster Bullet Puller body to run it. Good news is it works with both the Forster Standard and the Universal Bullet Puller, and the Universal version threads into virtually any press with standard 7/8-14 die threads, plus the Forster Co-Ax. Each collet is marked with the bullet diameter it pulls, so there's no guessing once it's on the bench. Swapping calibers is as easy as backing out the collet screw with a 9/16 wrench and dropping in a different size.

Why Handloaders Keep the Collet System Around

The collet design is what sets this apart from the hammer-style pullers a lot of folks start with. Because the grip tightens as the press applies pulling force, the bullet stays put and comes out straight. That internal grip is gentle enough to reuse the bullet in most cases, which is exactly what you want when you're pulling expensive .338 projectiles. For anyone loading .338 Winchester Magnum, .338 Lapua, .338-06, or similar, this is the collet that matches the bullet diameter.

If you already run a Forster Standard or Universal puller and shoot anything in the .338 family, this little collet earns its spot in the drawer the first time you need to take a round apart.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BP2338
  • Model: Collet #338
  • UPC: 757253003066
  • Caliber: .338 Caliber
  • Bullet Diameter: 0.338"
  • Material: Heat treated solid steel
  • Compatibility: Forster Standard and Universal Bullet Puller
  • Collet Screw Wrench Size: 9/16"
  • Type: Collet-style bullet puller collet
  • Country of Origin: USA

What’s Included

  • One Forster .338 Caliber Bullet Puller Collet #338 (BP2338)

Frequently Asked Questions

Does the #338 collet come with the bullet puller?

No, this is just the .338 collet by itself. You'll need a Forster Standard or Universal Bullet Puller body to use it. The collet drops into the puller and is held in place with the collet screw.

What bullet diameter does the Forster #338 collet pull?

It's made for bullets with a 0.338 inch diameter. That covers common loads like .338 Winchester Magnum, .338 Lapua Magnum, .338-06, and other cartridges using .338 projectiles.

Will this collet work with the Forster Universal Bullet Puller and other presses?

Yes. The same collets are used in both the Forster Standard and Universal Bullet Pullers. The Universal puller threads into standard 7/8-14 presses as well as the Forster Co-Ax, so this collet works across that whole setup.

Why use a collet puller instead of a hammer-style puller?

A collet puller grips the bullet from the inside and tightens as the press pulls, so the bullet comes out straight with less chance of damage. That means you can often reuse the bullet rather than tossing it. It's also quieter and faster than banging rounds in a mallet-style puller.

Additional information

UPC

757253003066

Manufacturer

Manufacturer Part Number

BP2338

Caliber/Gauge

.338 Caliber

Shipping Weight

0.04

Reviews

There are no reviews yet.

Be the first to review “Forster .338 Caliber Bullet Puller Collet #338 (BP2338)”