Description
The CMMG Resolute Mk4 Upper Group takes the 22 ARC cartridge and builds a legitimate precision carbine around it. This is not a bare receiver you have to finish out. It arrives as a complete upper with the bolt carrier group and a set of CMMG ZEROED accessories already in place, so you bolt it onto a standard AR-15 lower and head to the range. The whole idea behind 22 ARC is delivering the kind of downrange punch you would expect from a 22-250, but in a package that feeds and functions in a normal AR-15. Hornady designed the cartridge and chamber together using high-BC bullets, and the result is a flat-shooting round that stays useful well past distances most folks associate with the platform.
What Makes the Resolute 22 ARC Upper Tick
The barrel measures 16.1 inches with a 1:7 twist, which is the right pitch for stabilizing the long, heavy-for-caliber projectiles that give 22 ARC its reach. Typical factory loads run a 62-grain bullet around 3,300 fps or an 88-grain bullet near 2,820 fps, all built to shed velocity slowly and buck the wind. It runs a rifle-length gas system with a muzzle brake threaded 1/2×28, so swapping muzzle devices or adding a suppressor down the road is straightforward.
Building Around the CMMG Resolute Upper Group
Up top you get the EML15 M-LOK handguard, a free-float design with attachment slots at 3, 6, 9, and 12 o'clock. Dropping the full-length top rail trims weight while still leaving room for lights, bipods, sling mounts, and whatever else the job calls for. The billet 6061-T6 upper receiver and Cerakote finish keep things durable and clean-looking.
This is a smart pick if you already own an AR-15 lower and want to add serious reach without buying a whole new rifle. Pair it with the right magazines and you have a varmint and target setup that punches way above what a standard .223 build can manage, all backed by CMMG's lifetime guarantee.
Key Specifications
- Manufacturer: CMMG
- Manufacturer Part Number: 28B260CMB
- UPC: 810148627355
- Platform: Mk4 (AR-15)
- Caliber: .22 ARC
- Operating System: Direct Impingement
- Barrel Length: 16.1"
- Barrel Twist: 1:7
- Barrel Contour: MT (Medium Taper)
- Barrel Material: 4140CM SBN
- Muzzle Device: CMMG ZEROED Muzzle Brake
- Muzzle Thread: 1/2×28
- Gas System: Rifle Length
- Upper Receiver: Billet 6061-T6 Aluminum
- Handguard: CMMG EML15 M-LOK
- Finish: Midnight Bronze Cerakote
What’s Included
- Complete CMMG Resolute Mk4 upper receiver assembly (22 ARC)
- Bolt carrier group
- ZEROED AR-15 ambidextrous charging handle
- ZEROED AR-15 polymer dust cover
- CMMG ZEROED muzzle brake
Frequently Asked Questions
Does the CMMG Resolute 22 ARC upper come with a bolt carrier group?
Yes. This ships as a complete upper group, so the bolt carrier group is already installed. You also get CMMG's ZEROED charging handle, dust cover, and muzzle brake, meaning you can mount it to a lower and be ready to shoot.
Will this upper work on my standard AR-15 lower?
It is built on CMMG's Mk4 platform and designed to pair with any standard AR-15 pattern lower group. You will want the correct 22 ARC magazines to feed it properly, since standard 5.56 mags will not run the wider ARC case.
What kind of range and performance does 22 ARC actually deliver?
Hornady built 22 ARC to bring 22-250 level ballistics into the AR-15 platform using long, high-BC bullets. Depending on the load you can expect roughly 1,500 ft-lbs at the muzzle with plenty of energy retained past 300 yards, which makes it a strong choice for varmints, targets, and medium game at moderate range. The 1:7 twist on this barrel is spec'd to stabilize the heaviest .22 caliber projectiles.
Can I run a suppressor on the Resolute 22 ARC upper?
The muzzle is threaded 1/2×28, which is the common thread pitch for .22 caliber muzzle devices and many suppressors. You can remove the ZEROED brake and mount your device of choice, just confirm your can is rated for the caliber.





Reviews
There are no reviews yet.