Description
The CMC Triggers 92504 is one of those upgrades that changes how a rifle feels the second you press it. It's a fully self-contained, two-stage fire control group that drops into small-pin AR-15, AR-10, and LR-308 lowers with .154" trigger and hammer pin holes. You get a light 2 lb first stage that lets you take up the slack, then a clean 2 lb wall that breaks glass-smooth with no grit or creep. For anyone chasing tighter groups without wrestling a gritty mil-spec trigger, this is a straightforward path to better shooting.
What Sets the 92504 Two-Stage Apart
The flat trigger bow is the real star here. That flat face gives your finger more surface to rest against, which helps keep pressure consistent and your point of aim steady through the break. Paired with a short, positive reset, it makes follow-up shots fast and repeatable. CMC builds these from 8620 alloy steel and S7 tool steel with tight machined tolerances, so the pull stays consistent shot after shot. A lightened hammer and high-power Rocket Wire spring keep lock time minimal and reliability high with both commercial and surplus ammo.
Dropping the CMC 92504 Into Your Build
Installation is about as painless as AR upgrades get. The whole assembly is a single unit, so there's no fiddling with loose springs and pins flying across the bench. Knock out your old trigger and hammer pins, seat the CMC group, run the pins back through, and do a proper safety and function check. No gunsmithing required, and most folks have it done in a few minutes.
This pull weight is a favorite for designated marksman and precision-minded builds where a predictable, linear press matters more than a feather-light single stage. The trigger comes factory preset and is not user adjustable, which keeps things simple and consistent. Worth noting, it's not recommended for 5.45×39 uppers, and some heavier AR-10 setups may prefer a stouter trigger to guarantee reliable ignition. Made in Texas.
Key Specifications
- Manufacturer: CMC Triggers
- Manufacturer Part Number: 92504
- Model: Drop-In
- UPC: 850544004947
- Product Type: Trigger
- Trigger Type: Two Stage
- Trigger Style: Flat Bow
- First Stage Pull Weight: 2 lb
- Second Stage Pull Weight: 2 lb
- Adjustability: Non-adjustable, factory preset
- Pin Size: .154" Small Pin
- Fitment: AR-15 / AR-10 / LR-308
- Material: 8620 Alloy Steel and S7 Tool Steel
- Finish: Black
- Length: 7.7 in
- Country of Origin: USA (Texas)
What’s Included
- CMC Triggers 92504 self-contained two-stage flat trigger group (1)
Frequently Asked Questions
Will the CMC 92504 fit both AR-15 and AR-10 rifles?
Yes, it's designed to work with small-pin AR-15, AR-10, and LR-308 lowers that use the standard .154" trigger and hammer pin holes. Just confirm your receiver uses the small pin size before ordering. Keep in mind some heavier AR-10 and .308 setups may prefer a stiffer trigger to ensure reliable ignition.
Is the CMC two-stage trigger hard to install?
Not at all. The whole thing is a single self-contained unit, so you just punch out your old trigger and hammer pins, drop the CMC group in, and reinstall the pins. No gunsmithing needed, and most people finish in a few minutes followed by a safety and function check.
Can I adjust the pull weight on the 92504?
No, this trigger is factory preset at a 2 lb first stage and a 2 lb second stage and is not user adjustable. That preset design keeps the pull consistent and takes the guesswork out of tuning. If you want an adjustable option, CMC offers other models in their lineup.
What's the benefit of a flat trigger over a curved one?
The flat bow gives your finger more surface area to rest against, which helps you apply consistent pressure and keep the rifle steady through the break. Many precision shooters find it makes the pull feel lighter and more predictable. It comes down to preference, but flat triggers are popular for marksman-style builds.





Reviews
There are no reviews yet.