Description
The CMC Triggers Match Precision barrel is the kind of upgrade that quietly makes your Glock 17 shoot better without any drama during install. It's machined from pre-hardened 416R stainless steel, then ground and double honed to a mirror-smooth bore for consistent shot placement. You get 6-groove cut rifling with a right-hand 1:10 twist and a SAAMI match-grade chamber, so it's built to squeeze more accuracy out of the ammo you're already feeding it. The straight fluting trims a bit of weight and gives the whole thing a look that stands out the second you rack the slide.
What Sets the Match Precision Barrel Apart
The black diamond-like carbon (DLC) coating is the real workhorse here. It's hard, slick, and resists wear and corrosion, which means easier cleanup after a long range day and a finish that holds up round after round. Underneath the coating, the bore and chamber get a hexagonal boron nitride (hBN) treatment that cuts friction and helps the barrel stay easy to wipe down. Between the DLC and the hBN, carbon and copper fouling tend to come off with a lot less scrubbing.
Threads, Fit, and Feeding Your Glock 17
The muzzle is threaded 1/2×28 with a right-hand pitch, the standard for 9mm, so it plays nice with the vast majority of suppressors, compensators, and muzzle devices out there. This is a true drop-in barrel built to fit Glock 17 Gen 3 and Gen 4 frames with no fitting or gunsmithing required. Pop your slide apart, swap the factory barrel, and you're back together in a couple of minutes. Owners who've run these consistently mention they cycle reliably right out of the box and don't need a break-in period, and plenty use them in aftermarket Glock-pattern builds too.
If you've been wanting to add a can or a comp to your G17 while also tightening up your groups, this barrel checks both boxes in one part.
Key Specifications
- Manufacturer: CMC Triggers
- Model: Match Precision
- Manufacturer Part Number: 75511
- UPC: 859464006352
- Caliber: 9mm Luger
- Barrel Length: 4.48"
- Fits: Glock 17 Gen 3 & Gen 4
- Material: Pre-hardened 416R Stainless Steel
- Finish: Black DLC (Diamond-Like Carbon)
- Bore & Chamber: Hexagonal Boron Nitride (hBN)
- Rifling: 6-Groove Cut Rifling
- Twist Rate: 1:10 Right-Hand
- Muzzle Thread: 1/2×28 RH
- Chamber: SAAMI Match Grade
- Profile: Straight Fluted
- Product Type: Handgun Barrel
What’s Included
- CMC Triggers Match Precision fluted threaded barrel
- 1/2×28 thread protector
Frequently Asked Questions
Will the CMC Match Precision barrel fit my Glock 17?
Yes, this barrel is designed as a drop-in replacement for Glock 17 Gen 3 and Gen 4 frames. No fitting or gunsmithing is required, so you can swap it in with a standard field strip. Just make sure your pistol is a Gen 3 or Gen 4 G17 before ordering.
What are the muzzle threads on this barrel?
The muzzle is threaded 1/2×28 with a right-hand pitch, which is the standard thread pattern for 9mm pistols. That makes it compatible with most 9mm suppressors, compensators, and muzzle devices. A thread protector is included to keep the threads clean when you're running the barrel bare.
Does the DLC coating and hBN bore make cleaning easier?
It does. The diamond-like carbon finish is hard and slick, while the hexagonal boron nitride treatment in the bore and chamber cuts friction and fouling. Together they help carbon and copper wipe away with a lot less effort after range sessions.
Is a break-in period needed before running this barrel?
Not really. Owners consistently report the Match Precision barrel drops in and cycles reliably right away without a dedicated break-in. As always, it's smart to run a range session to confirm reliability and check zero before relying on it.



Reviews
There are no reviews yet.