Description
Pistol caliber carbines have their own quirks, and one of the biggest is getting a good trigger to run reliably with 9mm bolt carriers. CMC solved that by taking the same drop-in design that made their name on AR-15 and AR-10 builds and reworking the hammer geometry for the PCC world. The result is a single-stage trigger that gives you a clean, predictable break every time you press it.
What Sets the CMC 9mm PCC Trigger Apart
The hammer dimensions on this unit are modified to play nice with the wide range of 9mm bolt carriers out there, so you get consistent ignition instead of the light strikes and hiccups that come from dropping a standard rifle trigger into a PCC lower. It runs a factory pre-set pull in the 3 to 3.5 lb range that CMC describes as breaking like glass, with no creep before the hammer drops and no gritty feel on the way through. Lock time is kept short thanks to a balanced hammer and a wire hammer spring, which means it cycles cleanly whether you feed it commercial or milspec ammo.
Built and Tested by Hand in Texas
CMC has been making drop-in trigger groups since 2003, and their sear engagement surfaces go through a proprietary machining process for a genuinely smooth finish. The internals are made from 8620 alloy steel and S7 tool steel, and each unit is hand assembled and hand tested before it leaves the shop. The whole thing is a self-contained cassette, so there are no loose springs or pins to fight with during install.
Flat Bow Feel for Repeatable Shots
The flat trigger bow is CMC's signature shape, and it gives your finger a natural resting spot so every press feels the same as the last. That consistency pays off on the timer if you shoot PCC matches, and it makes for a snappy positive reset that lets you get back on target quick. It's a non-adjustable design, which keeps things simple and dependable for the long haul.
Key Specifications
- Manufacturer: CMC Triggers
- Manufacturer Part Number: 95503
- UPC: 850544004220
- Model: Drop-In
- Product Type: Trigger
- Trigger Style: Flat Bow
- Action Type: Single Stage
- Pull Weight: 3 to 3.5 lb (factory pre-set, non-adjustable)
- Pin Size: Small Pin (0.154 in)
- Compatibility: 9mm AR-15 / AR-10 PCC Lowers
- Material: 8620 Alloy Steel and S7 Tool Steel
- Color: Black
- Length: 7.1 in
- Units per Box: 1
What’s Included
- CMC 9mm PCC flat single-stage drop-in trigger group
- CMC anti-walk pin set
Frequently Asked Questions
Will this CMC 9mm PCC trigger work with any 9mm bolt carrier?
CMC modified the hammer dimensions on this unit specifically to work with the various 9mm bolt carriers on the market, which is where a lot of standard rifle triggers run into trouble in a PCC lower. That said, PCC platforms vary quite a bit between manufacturers, so it's always smart to confirm your specific carrier and buffer setup. For most common 9mm AR builds this trigger drops right in and runs.
What pin size does this trigger use?
This is a small pin (0.154 inch) trigger, which is the standard size for most AR-15 lowers. It ships with CMC's anti-walk pin set, so you have everything needed to secure it in the receiver. If you have a large pin lower, you'd need a different configuration.
Is the 3.5 lb pull weight adjustable?
No, the pull is factory pre-set and non-adjustable, landing in the 3 to 3.5 lb range. CMC hand assembles and hand tests each unit to hold that spec, so you get a consistent break without needing to tune anything yourself. This keeps the trigger simple and reliable over the long haul.
How hard is it to install this drop-in trigger?
It's about as easy as trigger upgrades get. The whole thing is a self-contained cassette, so you remove your old fire control components, set this unit in the receiver, and secure it with the included anti-walk pins. Most folks with basic tools can have it done in a few minutes.




Reviews
There are no reviews yet.