0
0

CK Walther PDP 2.0 to Holosun 509T DOGTAG Optic Plate

UPC: 850069184056

$58.99

26 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting a Holosun 509T bolted onto a Walther PDP 2.0 the right way makes a real difference in how your setup holds up over time, and this Calculated Kinetics plate is built to do exactly that. It machines out of hard-anodized 7075 aluminum, which is a step up from the softer 6061 you see on a lot of factory and generic plates, so it takes a beating and shrugs off corrosion. Fit is dialed specifically for the PDP 2.0 and F Series optic-ready slides, and it will not work on the older PDP 1.0.

What the DOGTAG Design Brings to Your PDP

The part that sets this plate apart is the DOGTAG deflection table sitting just ahead of the optic. That angled front surface pushes gas and carbon away from the front lens instead of letting it cake up over a range session. Calculated Kinetics puts the reduction in the neighborhood of 75 to 80 percent versus a standard plate, and it really shows itself when you're running a can. Anyone who has fought a fogged-over dot after a suppressed string knows how much that matters.

Zero Retention and One-Hand Racking on the 509T Plate

Beyond keeping the glass clean, this mount tightens up the space between the optic and the slide and uses recoil lugs to keep the 509T from creeping left or right under recoil. Tighter tolerances than the factory plate help your dot stay put where you sighted it in. The deflection table also doubles as a racking surface, so you can run the slide against the plate with one hand instead of stressing the optic body itself, which is a nice bit of insurance if you ever end up working the gun injured or one-handed.

It's a duty-rated piece from an Arizona shop that has earned trust with a bunch of agencies, and installation is straightforward since the box has what you need to get it mounted and locked down.

Key Specifications

  • Manufacturer: Calculated Kinetics
  • Model: DOGTAG Optic Plate
  • Manufacturer Part Number: WALTHPDP-509DT
  • UPC: 850069184056
  • Firearm Fit: Walther PDP 2.0 and F Series (does not fit PDP 1.0)
  • Optic Compatibility: Holosun 509T X2 (not 509 ACSS)
  • Material: Hard-anodized 7075 aluminum
  • Finish: Anodized Black
  • Color: Black
  • Product Type: Optic-specific mount
  • Weight: 1.8 oz
  • Country of Origin: Made in the USA (Arizona)
  • Warranty: Limited Lifetime

What’s Included

  • DOGTAG optic plate
  • Mounting screws and hardware
  • Torx bit
  • Vibratite thread locker
  • Install card

Frequently Asked Questions

Will this DOGTAG plate fit my Walther PDP 1.0?

No, this plate is cut specifically for the PDP 2.0 and F Series optic-ready slides. The 1.0 uses a different slide cut and will not accept it. If you're not sure which generation you have, check the slide markings before ordering.

Does this fit the Holosun 509T ACSS model?

It's built for the standard Holosun 509T X2 footprint, not the 509 ACSS. Those two have different mounting dimensions, so grab the correct plate for the exact optic you're running to get a proper fit.

What does the gas-deflection table on the DOGTAG actually do?

The angled front surface redirects gas and carbon away from the front lens of your 509T, cutting buildup by roughly 75 to 80 percent compared to a standard plate. It's most noticeable when shooting suppressed, since that's when fouling on the glass tends to pile up fastest. The result is a cleaner sight picture over longer sessions with less wiping.

Do I get everything I need to install it, or do I have to buy hardware separately?

Everything comes in the box: mounting screws, a Torx bit, Vibratite thread locker, and an install card walking you through it. You won't need a trip to the hardware store to get your 509T mounted. Just follow the card and torque things down properly.

Additional information

UPC

850069184056

Manufacturer

Manufacturer Part Number

WALTHPDP-509DT

Color

Black

Model

Product Type

Mount

Reviews

There are no reviews yet.

Be the first to review “CK Walther PDP 2.0 to Holosun 509T DOGTAG Optic Plate”