Description
The Calculated Kinetics DOGTAG plate takes your optics-ready CZ P10 or Shadow 2 and sets it up to run a Holosun Full Size EPS. It fits the P10 and Shadow 2 Full and Compact optics-ready slides, and it drops right onto the factory optic cut with the hardware CZ already gave you space for. Worth noting up front: this one is cut for the full size EPS, not the EPS Carry, so make sure you've got the bigger optic before you order.
What sets the DOGTAG apart from a plain factory plate is the machined deflection table on the front edge. That angled surface pushes gas and carbon away from your optic glass, which really shows itself when you're running a suppressor or putting a lot of rounds downrange. Calculated Kinetics rates it at cutting lens carbon buildup by a good margin over standard plates, so your dot stays clear longer between cleanings. That same table doubles as a ledge you can push against to rack the slide one-handed without beating up your optic.
Why the DOGTAG Beats a Factory CZ Plate
This is built out of 7075 aluminum and hard anodized black, which is a step up from the 6061 you'll find on a lot of factory and budget aftermarket plates. The tighter fit between the plate and the slide closes up the gap that lets optics wander under recoil, and machined recoil lugs keep the sight from twisting side to side. Once you zero it, it holds.
Installing the CZ P10 EPS Plate
Calculated Kinetics doesn't make you hunt for tools. Every plate ships ready to go with the mounting hardware, a Torx bit, Vibratite thread locker, and an install card walking you through it. On CZ optics-ready models that came with the factory suppressor-height irons, you'll get a lower 1/3 co-witness through the EPS window, so your backup sights are right where you'd want them. It's a clean, no-fuss upgrade that gets a full size Holosun EPS riding solid on a gun it wasn't originally cut for.
Key Specifications
- Manufacturer: Calculated Kinetics
- Model: DOGTAG Optic Plate
- Manufacturer Part Number: CZP10-EPSDT
- UPC: 850069184063
- Fits: CZ P10 & Shadow 2 Full/Compact Optics Ready (not Carry)
- Optic Footprint: Holosun Full Size EPS
- Material: 7075 Aluminum
- Finish: Hard Anodized Black
- Color: Black
- Co-Witness: Lower 1/3 with factory optics-ready irons
- Weight: 1.6 oz
- Product Type: Optic Adapter Mount
- Warranty: Limited Lifetime
What’s Included
- DOGTAG optic plate
- Plate-to-slide mounting hardware
- Optic-to-plate mounting hardware
- Torx bit
- Vibratite thread locker
- Install card
Frequently Asked Questions
Will this DOGTAG plate fit my CZ P10 and Shadow 2?
It fits the CZ P10 and Shadow 2 Full and Compact optics-ready slides that share the same factory optic cut. It does not fit the Shadow 2 Carry slide. If your gun came from the factory as an optics-ready model, this plate mounts to that cut.
Which Holosun optics work with this plate?
This plate is cut for the Holosun Full Size EPS footprint. It is not the right plate for the EPS Carry or the smaller K-footprint optics like the 407K or 507K, so double-check that you have the full size EPS before ordering.
What does the DOGTAG deflection table actually do?
The angled surface machined into the front of the plate pushes gas and carbon away from your optic lens, which keeps the glass cleaner between cleanings and is especially noticeable when running suppressed. It also gives you a solid ledge to rack the slide one-handed without pressing directly on your optic.
Do I get a co-witness with the CZ P10 EPS plate?
Yes. On CZ optics-ready models that shipped with the taller optics-ready iron sights, this plate lines you up for a lower 1/3 co-witness through the EPS window. That keeps your backup irons usable if you ever need them.



Reviews
There are no reviews yet.