$1,631.99
32 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Nobody ever finished an elk hunt wishing their rifle weighed more. That thinking is behind everything Christensen Arms did with the Ridgeline FFT, and this 7mm PRC version might be the sweet spot of the whole lineup. Flash Forged Technology is Christensen's carbon fiber manufacturing process, and it shaves up to a full pound off the standard Ridgeline by using FFT construction in the stock, floor plate, and bolt knob. The result is a magnum-class rifle that comes in right around 5.8 pounds bare, which you will appreciate every single mile between the truck and your glassing spot.
The 22-inch 416R stainless barrel wears Christensen's aeroshell carbon fiber wrap and a 1:8 twist, which is exactly what the 7mm PRC needs to stabilize the long, high-BC bullets the cartridge was designed around. Think 175-grain ELD-X and similar heavy-for-caliber loads that hold velocity way out past where most hunting shots happen. The muzzle is threaded 5/8×24 and comes with a removable stainless side-baffle brake, so you can run the brake, swap to a suppressor, or cap it off plain. Even without the brake, this cartridge in this rifle recoils more like a .270 than the numbers would suggest. Every one is backed by Christensen's Sub-MOA guarantee, and range reports on this chambering consistently show it earning that promise with factory ammo.
The carbon fiber sporter stock with black and gray accents is bedded with aluminum pillars, and the internal magazine feeds 3+1 through a hinged FFT floor plate with billet aluminum bottom metal, so there is no detachable mag to lose in the snow. The spiral-fluted bolt runs a skeletonized handle with an interchangeable carbon bolt knob, the flat-shoe TriggerTech trigger breaks clean and crisp right out of the box, and the receiver accepts standard Remington 700 pattern bases, which makes mounting glass about as easy as it gets. If you cover rough country and want one rifle that handles everything from pronghorn to elk at distance, this one deserves a hard look.
No, it ships without sights or a base. The receiver is machined to accept standard Remington 700 pattern optic bases, so a long-action Rem 700 one-piece rail or two-piece bases will bolt right on and give you tons of ring and scope options.
Yes. The side-baffle brake is removable and the muzzle is threaded 5/8×24, which is the common thread pitch for most .30 caliber and 7mm rated suppressors. Just keep in mind that pulling the brake will change your point of impact slightly, so confirm zero after swapping muzzle devices.
It uses an internal box magazine holding 3 rounds of 7mm PRC plus one in the chamber, with a hinged FFT carbon fiber floor plate and billet aluminum bottom metal. The floor plate release sits inside the trigger guard for quick unloading, and there is no detachable mag to rattle or go missing in the field.
It is. Christensen backs every Ridgeline FFT with a Sub-MOA guarantee, and independent range testing of this 7mm PRC model has consistently produced groups at or under an inch with quality factory hunting loads. The stiff carbon-wrapped barrel and pillar-bedded stock do a lot of the work, and Christensen does recommend following their barrel break-in procedure to get the most out of it.
| UPC | 840290520488 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 8010631800 |
| Action | |
| ATF Type | RIFLE |
| Barrel Length | 22" |
| Caliber/Gauge | 7MM PRC |
| Capacity | 3 + 1 |
| Color | Silver |
| Length | 48 |
| Model | |
| Package Height | 4.0 |
| Package Width | 9.5 |
| Product Type | Rifle |
| Safety | Two-Position |
| Shipping Weight | 8.3 |
| Sights | No |
You must be logged in to post a review.
Reviews
There are no reviews yet.