Description
Christensen Arms built its name on high-end mountain rifles, and the Evoke line takes that same manufacturing know-how and puts it into a rifle regular hunters can justify. The Evoke Hunter in 6.5 PRC is the version most folks gravitate toward, and for good reason. You get a 22-inch free-floated 416R stainless steel barrel that Christensen hand laps at the factory, a match chamber, and a Cerakote finish that shrugs off weather. The muzzle wears 5/8×24 threads with an RFR-style brake installed, so you can run the brake to tame recoil, spin on a suppressor, or cap it and go.
Why the Evoke Hunter Earns Its Spot in the Truck
The Hunter trim steps up from the base Evoke with an integrated 0-MOA Picatinny rail already machined in, so mounting a scope is quick and there are no bases to fuss with. The stock wears Christensen's own Hunter camouflage pattern over a hybrid design that splits the difference between a classic sporter and a modern precision stock, with a straight comb, raised cheekpiece, near-vertical grip, and grippy texturing where your hands land. Sling studs and a bipod attachment point come standard, and the detachable MDT magazine drops free clean and feeds smooth.
A TriggerTech Trigger on a Field Rifle
The adjustable TriggerTech trigger is a genuine standout at this level. These triggers break clean with no creep thanks to their internal roller system, and you can dial the pull weight to your liking without pulling the stock off. Pair that with the 1:8 twist barrel, which stabilizes the long, heavy 6.5mm bullets this cartridge was designed around, and you have a rifle that reviewers have consistently shot to sub-MOA with factory hunting ammo.
Evoke Hunter 6.5 PRC in the Field
The 6.5 PRC chambering makes this a natural fit for mule deer, antelope, and elk-country distances where wind and range start to matter. It hits harder and flatter than a 6.5 Creedmoor without beating you up, especially with the brake on. Backed by Christensen's limited lifetime warranty, this is a rifle you set up once and hunt with for years.
Key Specifications
- Manufacturer: Christensen Arms
- Model: Evoke Hunter
- MPN: 801-15025-00
- UPC: 840290524059
- Caliber: 6.5 PRC
- Action: Bolt Action
- Barrel Length: 22 in
- Barrel Material: 416R Stainless Steel, Free-Floated, Hand-Lapped
- Muzzle: 5/8×24 Threaded with RFR-Style Brake
- Twist Rate: 1:8
- Trigger: Adjustable TriggerTech
- Stock: Synthetic Hybrid, Christensen Arms Hunter Camo
- Magazine: Detachable MDT Box Magazine
- Optics Mount: Integrated 0-MOA Picatinny Rail
- Finish: Black Cerakote
- Sights: None, Optics Ready
What’s Included
- Christensen Arms Evoke Hunter rifle
- One detachable MDT magazine
- RFR-style muzzle brake (installed)
- Owner's manual
Frequently Asked Questions
Is the Christensen Arms Evoke Hunter suppressor ready?
Yes. The 22-inch barrel comes threaded 5/8×24, which is the standard thread pitch for most 6.5mm and .30 caliber suppressors. The included RFR-style brake spins off, so you can mount a can directly or run a thread protector when you want a cleaner profile.
Does the Evoke Hunter come with a scope or scope bases?
It ships without sights or a scope, but the Hunter model has a 0-MOA Picatinny rail integrated into the receiver. That means no separate bases to buy or torque down. Just add rings and the optic of your choice and you're ready to zero.
Can I adjust the trigger on the Evoke Hunter myself?
Yes. The Evoke Hunter uses an adjustable TriggerTech trigger, and pull weight can be dialed in without removing the stock. These triggers are known for a crisp, creep-free break out of the box, with factory settings typically landing in the low 3-pound range.
Is 6.5 PRC a good pick for elk with this rifle?
It's a solid choice. The 6.5 PRC pushes heavy, high-BC bullets fast enough to carry energy well past typical Western shot distances, and the 1:8 twist barrel stabilizes those long projectiles nicely. With a quality bullet and good shot placement, it handles everything from antelope up through elk.




Reviews
There are no reviews yet.