Description
The .375 H&H Magnum has been putting big animals down for over a century, and it remains the classic pick for anyone heading somewhere the game bites back. The catch has always been that most rifles chambered for it feel like carrying a fence post up a mountain. The Christensen Arms Traverse solves that problem the Christensen way, wrapping a hand-lapped 416R stainless steel barrel in aerospace-grade carbon fiber to cut weight without giving up the stiffness that keeps groups tight. The 22-inch barrel wears a 1:12 twist and a threaded muzzle with a removable stainless side-baffle brake, which takes a real edge off the recoil of this cartridge and keeps you in the scope for a follow-up.
What Makes the Traverse Different
Under the hood you get a stainless receiver built on the familiar Remington 700 footprint, so scope bases, triggers, and gunsmith support are never a headache. The spiral-fluted bolt with an enlarged knob runs smooth even with cold hands or gloves, and the TriggerTech trigger breaks clean right out of the box. A 0-MOA optic rail comes standard up top, and there is a short Picatinny section under the forend for a bipod. Christensen spot beds the action and backs the whole package with their Sub-MOA accuracy guarantee, which is not something you see every day on a dangerous game caliber.
A Stock Built for Real Hunts
The Monte Carlo stock is carbon fiber composite finished in black with gray webbing, so it has the lines of a classic sporter with none of the swelling, warping, or extra ounces of wood. The raised comb lines your eye up naturally behind a scope, the beavertail forend settles nicely on packs and shooting sticks, and the recoil pad earns its keep in this chambering.
Christensen Arms Traverse .375 H&H at a Glance
With a 3+1 capacity and 5/8×24 muzzle threads ready for the included brake or a suppressor, this is a purpose-built rifle for elk, moose, bear, and plains game abroad. It carries like a mountain rifle and hits like a freight train.
Key Specifications
- Manufacturer: Christensen Arms
- Model: Traverse
- MPN: 801-10025-01
- UPC: 691328237713
- Caliber: .375 H&H Magnum
- Action: Bolt Action
- Barrel Length: 22 inches
- Barrel: Carbon fiber wrapped 416R stainless steel, hand-lapped, free-floated
- Twist Rate: 1:12
- Muzzle: Threaded 5/8×24 with removable stainless side-baffle brake
- Capacity: 3+1
- Trigger: TriggerTech
- Stock: Monte Carlo carbon fiber composite, black with gray webbing
- Optics Mounting: 0-MOA optic rail, bottom Picatinny rail for bipod
- Accuracy: Christensen Arms Sub-MOA guarantee
What’s Included
- Christensen Arms Traverse rifle
- Removable stainless steel side-baffle muzzle brake (installed)
- 0-MOA optic rail (installed)
- Owner's manual
Frequently Asked Questions
How bad is the recoil on the Christensen Arms Traverse in .375 H&H?
The .375 H&H is a stout cartridge, but this rifle is set up to manage it well. The stainless side-baffle brake knocks the felt recoil down considerably, and the Monte Carlo stock with its recoil pad spreads out what is left. Most people find it very shootable off the bench and hardly notice it in a hunting situation.
Can I run a suppressor on the Traverse instead of the brake?
Yes. The muzzle is threaded 5/8×24 and the side-baffle brake is removable, so you can swap on a suppressor or thread protector whenever you like. Just keep in mind the barrel has a light target contour, so check your can's mounting requirements before installing.
Does the Sub-MOA guarantee apply to this .375 H&H model?
It does. Christensen Arms backs the Traverse line with their Sub-MOA accuracy guarantee, which is rare for a rifle in a dangerous game chambering. With quality ammo it likes, this rifle will shoot tighter than most people can hold in the field.
Will Remington 700 scope bases and accessories fit the Traverse?
The Traverse is built on a Remington 700 pattern receiver, but you will not need bases since it ships with a 0-MOA optic rail already installed. Just add rings and your scope and you are ready to zero. There is also a Picatinny section under the forend for mounting a bipod.



Reviews
There are no reviews yet.