$22.99
36 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A good 2×4 and this topper are all you need to get steel standing tall at the range. The Champion 2×4 Target Stand Topper is a solid steel mount that slides onto the end of a standard wooden 2×4 post and holds your steel plate ready to take hits. It skips the fussy hardware and welded frames that most target stands rely on, so you spend your time shooting instead of rigging gear.
Built from heavy black steel, this topper is designed to take a beating and keep your target properly oriented round after round. It works with Champion's full line of Center Mass AR500 steel targets, which means you can run gongs, squares, silhouettes, and other plate shapes off the same mount depending on what you have on hand. Setup is quick: slide the topper onto a fresh 2×4, secure your plate, plant the post, and you're ready to send rounds downrange.
The beauty of this design is how portable and flexible it is. Since it runs on common dimensional lumber, you can build out a whole reactive steel bay with several of these or throw one in the truck for a single-target range day. Wood is cheap and easy to replace, so if a post takes a stray hit or you want to change your target height, you just swap the 2×4 and drop the topper back on. The steel construction holds up while the lumber does the sacrificial work.
At roughly 2.25 by 4.45 by 7.85 inches and just under three pounds, it's compact enough to stash in a range bag but stout enough to trust with heavier centerfire plates. If you already shoot Center Mass steel or plan to build out a target setup, this topper is one of the simplest ways to get there without overthinking it.
No, the topper is sold on its own. You supply your own standard 2×4 wooden post and your Center Mass AR500 steel target. That is part of what keeps it affordable and easy to replace, since lumber is cheap and available at any hardware store.
It is built to run Champion's full line of Center Mass AR500 steel targets, including various gongs, squares, and silhouette plates. The mount is designed to hold your plate at the right height and orientation for clean reactive feedback. If you have Center Mass steel, this topper is made to fit it.
Yes, the solid steel construction is built to take a beating and keep the target oriented shot after shot. Just make sure your target plate itself is rated for the caliber and distance you're shooting, and follow safe minimum distances for steel. The topper is the mount, so plate selection determines what you can safely run.
Setup takes seconds with minimal assembly. You slide the topper onto the end of a 2×4, secure your steel plate, and stand the post up in your base or the ground. It's one of the fastest, most portable ways to get reactive steel standing without welded frames or complicated hardware.
| UPC | 604544621952 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 44103 |
| Color | FITS ON 2X4/BLACK |
| Length | 7.8500 |
| Product Type | Stand Topper |
| Quantity | 1 |
| Shipping Weight | 2.785 |
You must be logged in to post a review.
Reviews
There are no reviews yet.