0
0

C&H Precision Glock Gen6 MOS to Holosun 509T Steel Adapter Plate

UPC: 850071159929

$69.99

129 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

C&H Precision built this adapter plate for one job: getting a Holosun 509T mounted solid on a Glock Gen6 Optic Ready System slide. It's machined from mild steel and finished in a hard coat black, which gives it the rigidity you want under recoil so your dot stays put instead of walking off zero after a few range sessions. Every plate is cut on HAAS CNC machines at their small family-owned shop on the Georgia coast and run through multiple quality checks before it ever leaves the building.

What the Gen6 to 509T Plate Fits

This one is cut specifically for the newer Gen6 optic footprint, so it covers a wide spread of full-size and compact models including the G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, and G47 in the Gen6 Optic Ready configuration. It will not fit the older Gen5 optic cut, so it's worth double-checking which generation slide you're working with before you order. It's also matched to the standard Holosun 509T and is not set up for the 509 ACSS Vulcan variant.

Why the Steel Build Matters on This 509T Adapter

The steel construction is the main story here. The 509T is a closed-emitter optic with some mass to it, and a stiffer steel plate transfers less flex and load into the mounting screws, which is exactly what keeps your zero honest round after round. C&H's design uses a replaceable stainless T-Nut system for deep thread engagement, so if a screw or piece of hardware ever gets buggered up, you can swap the hardware without tossing the whole plate.

Installation is straightforward using the three supplied M4 x 7mm screws. Set your plate, torque to C&H's guidance, mount the optic, then function-check and re-zero before you trust it. It's a clean, no-drama way to turn a Gen6 Glock into a 509T host.

Key Specifications

  • Manufacturer: C&H Precision
  • Manufacturer Part Number: G6-509T-ST
  • UPC: 850071159929
  • Product Type: Optic Adapter Plate
  • Host Slide: Glock Gen6 Optic Ready System (MOS)
  • Optic Compatibility: Holosun 509T (not 509 ACSS Vulcan)
  • Plate Material: Mild Steel
  • Hardware Material: Stainless Steel
  • Finish: Hard Coated Black
  • Color: Black
  • Mounting Hardware: Qty 3 M4 x 7mm M3H screws
  • Country of Origin: Made in USA (Coastal Georgia)

What’s Included

  • 1 optic adapter plate
  • 3 M4 x 7mm M3H plate mounting screws

Frequently Asked Questions

Will this plate fit a Gen5 Glock MOS slide?

No. This plate is cut specifically for the Glock Gen6 Optic Ready System and will not fit the older Gen5 optic cut. If you're running a Gen5 MOS slide, you'll want C&H's Gen5 MOS to 509T plate instead.

Does this work with the Holosun 509T ACSS Vulcan?

It's designed for the standard Holosun 509T and is not set up for the 509 ACSS Vulcan variant. Stick with a non-ACSS 509T for a proper fit.

Why is this 509T plate steel instead of aluminum?

The 509T is a heavier closed-emitter optic, and steel gives the plate extra rigidity so less flex and load gets transferred into the mounting screws. That stiffness is what helps the optic hold zero through higher round counts.

What screws come with the plate and does it include optic screws?

It ships with three M4 x 7mm M3H screws that fasten the plate to the Gen6 slide. For mounting the optic to the plate, use the hardware that came with your Holosun 509T.

Additional information

UPC

850071159929

Manufacturer

Manufacturer Part Number

G6-509T-ST

Color

Black

Product Type

Mount

Reviews

There are no reviews yet.

Be the first to review “C&H Precision Glock Gen6 MOS to Holosun 509T Steel Adapter Plate”