Description
SNS Cast Bullets builds these .358 diameter projectiles for reloaders who want cast-bullet economy without the mess that usually comes with it. Each one is a 125-grain round nose flat point cast from a 92% lead, 6% antimony, 2% tin alloy and finished with a polymer coating. That coating fully wraps the bullet, so you get far less exposed lead when you're seating and handling them, and noticeably less smoke when you touch one off. These drop into .358 sizing for .38 Special and .357 Magnum loads.
What the SNS .358 125gr Coated Lead Bullet Brings to the Bench
The company was started by competitive shooters, and it shows in how consistent these run through a press. The polymer coating means no sticky wax lube gumming up your seating and crimping dies, which is one of the biggest headaches with traditional lubed cast bullets. Treat them like cast bullets when it comes to load data, give the case mouth a proper flare, and seat straight so you don't shave the coating. The alloy comes in around 18 Brinell hardness, which is a good all-around hardness for target and practice-level pressures.
Why Reloaders Keep Coming Back to SNS Coated Cast Bullets
The RNFP profile is a workhorse shape. The flat point feeds reliably and punches a cleaner hole in paper than a plain round nose, and the light 125-grain weight keeps recoil mild for fast strings and long range days. This is a go-to for USPSA, IDPA, steel practice, and plain old plinking where you're burning through a lot of rounds and want to keep cost per shot down.
Because the coating cuts down on barrel leading and keeps airborne lead to a minimum, cleanup at the end of a session is quicker and the bench stays tidier. For anyone loading .38/.357 in volume, these hit that sweet spot of cast-bullet pricing with a lot of the convenience you'd expect from plated.
Key Specifications
- Manufacturer: SNS Cast Bullets
- MPN: SS38125RNFP
- UPC: 421000303265
- Caliber: .38 Caliber / .357
- Bullet Diameter: 0.358 in
- Bullet Weight: 125 Grain
- Bullet Style: Round Nose Flat Point (RNFP)
- Coating: Polymer Coated
- Alloy: 92% Lead / 6% Antimony / 2% Tin
- Hardness: 18 Brinell
- Quantity: 500 per box
What’s Included
- 500 SNS Cast .358 125gr RNFP polymer coated lead bullets
Frequently Asked Questions
What calibers do these SNS .358 125gr bullets work for?
These are .358 diameter bullets sized for .38 Special and .357 Magnum. The 125-grain RNFP profile is a popular choice for light, fast-handling target and practice loads in both cartridges. Always check your load data and verify fit in your specific barrel.
Are these coated bullets cleaner to load than traditional lubed cast?
Yes. The polymer coating fully encapsulates the bullet, so there's no waxy lube to gum up your seating and crimping dies and far less exposed lead to handle. Shooters also report noticeably less smoke on the firing line compared to wax-lubed cast bullets.
What load data should I use for the SNS 125gr coated bullets?
Start with published cast lead bullet data for a 125-grain .38/.357 projectile and work up carefully. Most polymer coated bullets behave like cast in terms of pressure and velocity, and these are rated at 18 Brinell hardness, which suits target and practice-level loads. Flare your case mouth properly and seat straight to avoid shaving the coating.
Will these bullets lead up my barrel?
The polymer coating is designed to cut down on barrel leading compared to bare or wax-lubed cast bullets, which means easier cleanup after a range session. Keeping your loads in the target and practice velocity range and using the correct .358 diameter helps keep things clean. As always, inspect your bore when switching between lead and jacketed bullets.





Reviews
There are no reviews yet.