$181.28
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
L.E. Wilson has been building case trimmers since 1936, and this stainless version carries on a reputation that precision handloaders have trusted for generations. What sets the Wilson design apart is how it holds the brass. Instead of clamping the case by the rim or shellholder, the case sits in a case holder that mimics a rifle chamber, so it's indexed by its own body taper. That means every trim comes out square and consistent, which is exactly what you want when you're chasing tight groups and uniform case length across a batch.
This kit trims .17 through .45 caliber cases with the correct case holder, and it covers trim lengths from roughly .650 up to 3.000 inches. Keep in mind case holders are sold separately, so you'll pick the one that matches your cartridge. The trimmer, cutter, and crank handle are all included, and the newer version ships with a 304 stainless steel handle for a smoother, more durable feel on the bench.
The case holder drops into a rail system that also carries the cutter housing, keeping the cutter and case in perfect alignment every single time. The result is a clean, burr-minimizing cut that doesn't leave you fighting to retract the pilot. It's a system that rewards you with repeatability, and once you dial in the stop screw, you can run through a pile of brass without second-guessing your lengths.
This kit includes the Wilson logo stand and the case holder clamp, which makes the whole process faster and a lot more comfortable. The stand can be C-clamped to your bench or permanently mounted with screws, and the clamp swings over the case holder to apply steady downward pressure while you trim. The stainless build is coated for a long-lasting finish, and the larger stop screw adjustment gives you a firm, confident stop setting.
Beyond basic trimming, these trimmers can also handle inside neck reaming, military crimp removal, and case mouth deburring when you add the appropriate cutters. Made in the U.S.A. by a family-owned shop that's been at it since 1927, this is the kind of tool you buy once and pass down.
No, case holders are sold separately with this kit. The Wilson design indexes each case in a holder that mimics a rifle chamber, so you'll want to pick the case holder that matches your specific cartridge. This kit covers .17 through .45 caliber once you pair it with the right holder.
You get the Wilson case trimmer, the cutter, a 304 stainless steel crank handle, the Wilson logo stand, and the stainless steel case holder clamp. That's everything you need to start trimming except the caliber-specific case holder. The stand can be clamped or bolted to your bench top.
Yes. Beyond trimming cases square and to a consistent length, these trimmers can handle inside neck reaming, military crimp removal, and case mouth deburring when you add the appropriate cutters. It's a flexible setup that grows with your reloading needs.
The case holder sits in a rail system that also carries the cutter housing, which keeps the cutter and case in perfect alignment on every pass. The case is held by its own body taper rather than the rim, so you get a square, repeatable trim batch after batch. That alignment is the main reason precision handloaders reach for the Wilson design.
| UPC | 815145022813 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CTS-RKITU |
You must be logged in to post a review.
Reviews
There are no reviews yet.