Description
Carlson's built this 18.5" barrel for one job: taking a standard Remington 870 12 gauge and making it a lean, fast-pointing shotgun for defense and close-in work. It swaps in with the same field-strip you already know, so most folks have it running in a couple of minutes. Being threaded for the Rem Choke system means it's more versatile than a fixed-choke short barrel, letting you tune your pattern depending on what you're loading.
What Sets This Carlson's 870 Barrel Apart
The barrel is forged from certified ordnance-grade 4140 steel and carries a chrome-lined bore, which shrugs off wear and makes cleanup a whole lot less of a chore. The chrome lining also runs uniform through the bore, so your patterns stay consistent shot after shot. Up top you get a ramped front sight, and the whole thing wears a matte blued finish that keeps glare down and blends nicely with an Express-style receiver.
Chamber, Choke, and Fit Notes for the Remington 870
This is an 18.5" barrel with a 3" chamber, so it handles both 2-3/4" and 3" loads. It ships with a Carlson's cylinder choke tube already installed, and since the threading matches the standard Rem Choke pattern, your existing tubes will thread right in. Owners running standard 870 Express and Wingmaster models report clean, tight fitment and appreciate having a smoothbore, choke-threaded short barrel on hand.
A Practical Second Barrel for Your 870
Plenty of people pick this up to turn a bird gun into a dual-purpose setup, keeping the long barrel for the field and dropping this one on for home duty. It's a straightforward, well-made piece of American steel that fills the gap left by hard-to-find factory barrels. Keep in mind it's made for the standard 870 and won't work with the newer 6-shot fixed tube tactical models or the detachable magazine DM version.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 87004
- UPC: 723189870041
- Model: Remington Choke System
- Fits: Remington 870 (standard models)
- Gauge: 12 Gauge
- Barrel Length: 18.5"
- Chamber: 3"
- Bore: Chrome Lined
- Material: Certified Ordnance-Grade 4140 Steel
- Finish: Blued Matte / Black
- Sights: Ramp Front
- Choke System: Rem Choke Threaded
- Choke Included: Cylinder
- Shipping Weight: 2.22 lbs
What’s Included
- Carlson's 18.5" Remington 870 12GA replacement barrel
- Carlson's cylinder choke tube (pre-installed)
Frequently Asked Questions
Will this Carlson's barrel fit my Remington 870?
It's made for standard Remington 870 12 gauge models, including the Express and Wingmaster, and swaps in using the normal field-strip process. It will not fit the newer factory tactical models with the 6-shot fixed magazine tube, the 870 DM with the detachable magazine, or left-hand receivers. If you have a standard 5-shot or extended-tube setup, you're good to go.
Does the 18.5" barrel come with a choke tube?
Yes. It ships with a Carlson's cylinder choke tube already installed. Because the barrel is threaded for the standard Rem Choke system, any of your existing Rem Choke tubes will thread right in so you can adjust your pattern for different loads.
Can I shoot both 2-3/4" and 3" shells through it?
The barrel has a 3" chamber, so it handles both 2-3/4" and 3" 12 gauge loads. One thing to keep in mind: if your 870 was originally set up strictly for 2-3/4" shells, the receiver's extractor may not reliably feed 3" rounds, so it's worth confirming what your gun was built for.
Is this barrel a smoothbore for defense or a rifled slug barrel?
This is a smoothbore cylinder-choke barrel, which makes it a great fit for buckshot and birdshot at close range for home defense or clearing work. It's not rifled, so it isn't the pick for sabot slugs, though it'll still stack standard rifled slugs fine at short distances.




Reviews
There are no reviews yet.