Description
If you've got a smoothbore 20 gauge Remington and you're tired of watching your slugs wander at distance, this is one of the simplest fixes out there. Carlson's rifled extended choke tube threads right into a Rem Choke barrel and adds a slow, controlled twist to your slugs, which is exactly what you need to steady them up before they leave the muzzle. It's a fraction of the hassle and expense of buying a dedicated rifled slug barrel, and swapping it in takes about a minute with a choke wrench.
What the Rifled 20 Gauge Choke Actually Does
The magic is in the internal rifling. This tube carries a 1-in-35 right-hand twist, which is a deliberately slow rate that spins the slug just enough to stabilize it without beating up your gun. The groove diameter runs .620 for 20 gauge, and it's built to handle standard Foster-style rifled slugs as well as sabots. Plenty of folks report their groups tightening noticeably once this goes in, with sub-3-inch groups at 50 yards being a realistic expectation from a gun that shot patterns before.
Built From Stainless and Backed for Life
Carlson's machines these from high-stress stainless steel with a matte black finish, so corrosion resistance is baked in and there's no glare shining back at you in the deer stand. It's an extended design that protrudes past the muzzle, which also gives the end of your barrel a little protection. Carlson's is made in the USA and stands behind every tube with a lifetime warranty, so if anything ever goes wrong you send it back and they replace it.
Getting the Most From It
This choke shines in the 50 to 100 yard range for whitetail work. Slug guns are famously picky, so it pays to pattern a few different brands of ammo to see what your barrel likes best. A dab of choke tube lube on the threads at install makes removal down the road much easier. It's a smart, affordable way to squeeze real accuracy out of a shotgun you already own.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 40021
- UPC: 723189400217
- Gauge: 20 Gauge
- Thread Pattern: Remington Rem Choke
- Choke Type: Rifled, Extended
- Twist Rate: 1 in 35, right-hand
- Groove Diameter: .620 in
- Constriction: .010 in
- Material: Stainless Steel
- Finish: Matte Black
- Length: 7.75 in
- Chokes Included: One
- Origin: Made in USA
- Warranty: Lifetime
What’s Included
- One 20 Gauge Remington Rem Choke rifled extended choke tube
- Choke wrench
Frequently Asked Questions
Will this rifled choke tube fit my 20 gauge shotgun?
It's cut for the Remington Rem Choke thread pattern, so it drops into any 20 gauge barrel that uses Rem Choke tubes, including the popular Remington 870 and 1100 platforms. If you're not sure what thread system your gun uses, check the owner's manual or the marking on your existing choke. Trying to force a mismatched thread pattern won't work, so confirm before you install.
Do I need special slug ammo to use the Carlson's rifled choke tube?
No, and that's part of the appeal. This tube works with standard Foster-style rifled slugs as well as sabot slugs, so you don't have to buy anything exotic. Since every barrel has its favorites, pattern a couple of different loads to find the one that groups tightest for you.
How much accuracy improvement should I expect from a smoothbore barrel?
This isn't going to turn your shotgun into a bolt rifle, but the gains are real. Many users see groups shrink noticeably, with sub-3-inch groups at 50 yards being a common report and effective performance out to around 100 yards for whitetail. It's a big step up from what a smoothbore delivers with a standard choke.
Is the rifled extended choke tube durable and does it carry a warranty?
It's machined from high-stress stainless steel with a corrosion-resistant matte black finish, so it holds up to the elements and hard use. Carlson's is made in the USA and backs every choke tube with a lifetime warranty. If it ever fails, you ship it back and they replace it.




Reviews
There are no reviews yet.