Description
The mid-range distance is where a lot of waterfowl hunting actually happens, and this Carlson's Delta Waterfowl tube is built to own that window. It's an extended mid-range choke cut for Beretta and Benelli Mobil 12 gauge shotguns, running a 0.705 inch constriction that tightens up your steel loads without pinching them so hard your pattern goes ragged. Carlson's dials these in with decades of patterning data, and it shows when you shoot it over decoys or on birds working the edges.
What Sets the Delta Waterfowl Mid-Range Apart
The big story here is the parallel section. This tube runs about 25% longer than a conventional choke, which gives the shot column more time to settle before it leaves the barrel. The payoff is fewer flyers and a denser, more consistent core, exactly what you want when a mallard is hanging at 35 yards. It's machined from 17-4 stainless steel with a blue finish, so it laughs off wet blinds, salt marsh, and the general abuse that comes with duck season.
Steel Shot and Barrel Protection with the 07115 Choke
All steel shot sizes are fair game through the mid-range constriction, so you don't have to baby your load selection the way you would with a tighter long-range tube. The choke extends about 3/4 inch past the muzzle, which keeps prolonged steel use from beating up your barrel threads and crown over time. Carlson's rates the mid-range for roughly 25 to 40 yard work, making it the do-everything tube for most decoy and pass-shooting setups.
Field-Friendly Details on This Carlson's Choke
The knurled extension lets you swap tubes by hand in the cold without hunting for a wrench, and the constriction and size are laser marked right on the body so there's no guessing which tube is in your gun. It carries Carlson's lifetime warranty and is made in the USA. On top of that, a portion of every purchase supports Delta Waterfowl's conservation work, so your gear upgrade puts a little something back into the marsh.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 07115
- UPC: 723189071158
- Series: Delta Waterfowl Extended
- Gauge: 12 Gauge
- Constriction / Range: Mid-Range
- Diameter: 0.705 in
- Fits: Beretta / Benelli Mobil
- Material: 17-4 Stainless Steel
- Finish: Blue
- Style: Extended (approx. 3/4 in past barrel)
- Shot Type: Steel (all sizes), Lead, Non-Toxic
- Chokes Included: One Choke
- Effective Range: Approx. 25 to 40 yards
- Warranty: Lifetime
- Origin: Made in USA
What’s Included
- One Carlson's Delta Waterfowl mid-range extended choke tube (07115)
Frequently Asked Questions
What shotguns does the Delta Waterfowl 07115 choke tube fit?
This tube is threaded for Beretta and Benelli Mobil 12 gauge shotguns. If your gun uses the Mobil choke system, this drops right in. When in doubt, check the choke system listed for your model or look at the markings on your existing tube before ordering.
Can I shoot steel through this mid-range choke?
Yes. All steel shot sizes are approved through the Carlson's mid-range constriction, so you've got flexibility with your load choice. The extended design also pushes the tube about 3/4 inch past the muzzle to help protect your barrel from prolonged steel use.
What range is the Delta Waterfowl mid-range choke best for?
Carlson's designs the mid-range tube for shots in the 25 to 40 yard window, which covers most decoy and general waterfowl situations. It's the versatile middle ground between the close-range tube for birds in your face and the long-range tube for pass shooting. For a lot of hunters, it's the tube that stays in the gun most of the season.
Do I need a wrench to install this choke tube?
No wrench required. The knurled extension gives you enough grip to install and remove it by hand, even with cold fingers in the blind. A quick check to make sure it's seated snug is always smart before you load up.




Reviews
There are no reviews yet.